PCA-6L-10-HU-3 Equivalent & Substitute Parts

Part Overview

The PCA-6L-10-HU-3 is a 10-position FFC/FPC connector manufactured by Adam Tech, designed for surface mount, right-angle applications with 0.50mm pitch contacts. This connector features zero insertion force (ZIF) operation, slide lock retention, and solder termination for flat flexible cable assemblies.

The PCA-6L-10-HU-3 is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or repair requirements for systems utilizing this connector.

Substiute Parts

PCA-6L-10-HU-3

Adam TechIn Stock: 995PCA-6L-10-HU-3 Datasheet

Current PartRFQ

ZF5S-10-02-T-WT

Samtec Inc.In Stock: 1568ZF5S-10-02-T-WT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PCA-6L-10-HU-3 is determined by strict alignment of the following critical parameters:

• Position Count: 10 positions (fixed requirement)
• Pitch: 0.020" (0.50mm) (fixed requirement)
• Mounting Configuration: Surface mount, right-angle orientation (fixed requirement)
• Contact Arrangement: Top-mounted contacts (fixed requirement)
• Termination Method: Solder termination (fixed requirement)
• FFC Thickness: 0.30mm (fixed requirement)
• Locking Mechanism: Slide lock (fixed requirement)
• Cable End Configuration: Straight (fixed requirement)
• Operational Features: Zero insertion force (ZIF) and solder retention (fixed requirement)

The ZF5S-10-02-T-WT from Samtec Inc. meets all critical substitution criteria. This part maintains identical position count, pitch, mounting type, contact arrangement, termination method, FFC thickness, locking feature, cable end type, and operational features as the PCA-6L-10-HU-3.

Parameter Comparison

Engineering Selection Recommendations

The ZF5S-10-02-T-WT is a direct functional substitute for the PCA-6L-10-HU-3. Both connectors are ROHS3 compliant and share identical critical mechanical and electrical parameters required for FFC/FPC interconnection at 0.50mm pitch.

The ZF5S-10-02-T-WT offers the advantage of active product status, ensuring ongoing availability and supply chain support. The substitute part provides an extended operating temperature range (-55°C ~ 105°C versus -25°C ~ 85°C) and increased current rating (1.8A per contact versus 0.5A), which may benefit thermal and power delivery performance in applications where these parameters are relevant.

The housing and actuator materials differ (LCP versus thermoplastic), and the height above board varies by 0.006" (0.15mm). These differences do not affect functional substitution for standard FFC/FPC applications but should be verified against specific PCB layout and mechanical clearance requirements.

Frequently Asked Questions (FAQ)

Q: Can the ZF5S-10-02-T-WT replace the PCA-6L-10-HU-3 in existing designs?

A: Yes. Both connectors share identical position count (10), pitch (0.50mm), mounting configuration (surface mount, right angle), contact arrangement (top), termination method (solder), FFC thickness (0.30mm), locking mechanism (slide lock), and operational features (ZIF, solder retention). These parameters determine mechanical and electrical compatibility for FFC/FPC applications.

Q: What are the differences between these two connectors?

A: The primary differences are product status (active versus obsolete), housing/actuator material composition (LCP versus thermoplastic), height above board (2.10mm versus 2.25mm), operating temperature range (-55°C ~ 105°C versus -25°C ~ 85°C), and current rating (1.8A per contact versus 0.5A). The substitute part provides enhanced thermal and power delivery capabilities.

Q: Are there any compliance or certification differences?

A: Both connectors are ROHS3 compliant and REACH unaffected. Compliance status is equivalent between the two parts.

Q: Does the height difference affect PCB layout?

A: The ZF5S-10-02-T-WT is 0.006" (0.15mm) lower than the PCA-6L-10-HU-3. This difference is minimal and typically does not affect standard PCB designs, but mechanical clearance should be verified for applications with tight vertical constraints.

Q: What is the packaging difference?

A: The PCA-6L-10-HU-3 packaging is not specified in available data. The ZF5S-10-02-T-WT is supplied in tube packaging.