PC96-30-30-1.5 Thermal Pad Equivalent & Substitute Parts

Part Overview

The PC96-30-30-1.5 is a thermal pad manufactured by t-Global Technology with dimensions of 30mm × 30mm × 1.5mm thickness. This component is classified as an uncategorized thermal interface material designed for heat dissipation applications. The product is currently listed as obsolete, which necessitates identification of equivalent or substitute components for ongoing procurement and system maintenance.

Substiute Parts

PC96-30-30-1.5

t-Global TechnologyIn Stock: 825PC96-30-30-1.5 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Thermal pad substitution is determined by the following critical parameters:

• Physical Dimensions: Length, width, and thickness must match or be compatible with the application mounting surface and thermal interface requirements
• RoHS Compliance Status: Substitute parts must maintain equivalent environmental compliance certification
• Moisture Sensitivity Level: MSL rating must be equal to or lower than the original component to ensure reliability in storage and handling conditions
• Regulatory Classification: ECCN and HTSUS codes should align for supply chain consistency

Based on the provided input data, no substitute parts have been identified in the current database. Equivalent alternatives would require matching the 30mm × 30mm × 1.5mm dimensional specification while maintaining RoHS compliance and MSL 1 rating.

Parameter Comparison

Engineering Selection Recommendations

The PC96-30-30-1.5 is RoHS compliant with an MSL rating of 1, indicating unrestricted shelf life and minimal moisture sensitivity. When sourcing replacement thermal pads, prioritize components that maintain these compliance certifications. The obsolete status of this part requires evaluation of current-production thermal pad alternatives with identical dimensional specifications (30mm × 30mm × 1.5mm) to ensure mechanical and thermal interface compatibility with existing designs.

Frequently Asked Questions (FAQ)

Q: What makes a thermal pad suitable as a substitute for the PC96-30-30-1.5?

A: A substitute thermal pad must match the dimensional specification of 30mm × 30mm × 1.5mm and maintain RoHS compliance with an MSL rating of 1 or better.

Q: Why is the product status listed as obsolete?

A: Obsolete status indicates that t-Global Technology has discontinued production of this specific model. Alternative thermal pads with equivalent specifications should be evaluated for new procurement.

Q: Does MSL 1 rating affect component handling?

A: MSL 1 indicates unlimited shelf life with no moisture sensitivity restrictions, allowing standard storage and handling procedures without special environmental controls.

Q: Are there dimensional tolerance considerations for thermal pad substitution?

A: Thermal pads must fit within the designated mounting area. The 30mm × 30mm footprint and 1.5mm thickness are critical for proper thermal interface contact and mechanical fit.

Q: How does RoHS compliance impact substitute part selection?

A: RoHS compliance ensures the component meets environmental regulations for hazardous substance restrictions. Substitute parts must maintain equivalent or superior compliance status.