PC826N Equivalent & Substitute Parts Reference

Part Overview

The PC826N is a Yagi cell antenna manufactured by TE Connectivity Laird, designed for operation in the 880-960MHz frequency band with a 12-inch form factor and N-type female connector. This component is classified as obsolete and is no longer in active production. Due to its obsolete status, identification of functionally equivalent substitute components is necessary for system redesign, maintenance, and component sourcing in applications requiring comparable RF antenna performance within the cellular frequency range.

Substiute Parts

PC826N

TE Connectivity LairdIn Stock: 1225PC826N Datasheet

Current PartRFQ

YS8063

TE Connectivity LairdIn Stock: 1065YS8063 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PC826N is determined by the following critical parameters:

Frequency Compatibility: The PC826N operates in the 880-960MHz cellular band. Substitute components must operate within or encompass this frequency range to maintain system performance.

Antenna Architecture: The PC826N is a Yagi antenna configuration. Substitute parts must employ the same Yagi architecture to preserve radiation pattern, gain characteristics, and mechanical form factor compatibility.

Connector Interface: The N-type female termination is a standard RF connector for this frequency class. Substitute parts must maintain N-type female connectivity for direct integration without adapter requirements.

Mechanical Form Factor: The 12-inch physical length establishes mounting and spatial constraints. Substitute components must be compatible with existing mechanical mounting infrastructure.

Electrical Performance Class: Gain, VSWR, and power handling specifications define the performance envelope. Substitute parts must operate within equivalent electrical performance parameters.

The YS8063 is identified as a substitute component based on these criteria.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The PC826N is obsolete and no longer manufactured. The YS8063 is an active product in current production by the same manufacturer, ensuring long-term component availability and supply chain continuity.

Frequency Band Alignment: The YS8063 operates at 851MHz center frequency with a range of 809-896MHz. This range encompasses the lower portion of the PC826N's 880-960MHz band. Applications operating in the 880-960MHz band should verify that the YS8063's frequency response is adequate for the specific application requirements, particularly for frequencies above 896MHz.

Mechanical Integration: The YS8063 has a maximum height of 16.732 inches (425mm), compared to the PC826N's 12-inch specification. System designs must accommodate this 4.732-inch dimensional increase. Existing mounting structures designed for the PC826N may require modification or re-evaluation for the YS8063.

Connector Compatibility: Both components feature N-type female terminations, enabling direct RF connection without adapter components.

Compliance Status: The YS8063 is RoHS compliant and carries an ECCN classification of 5A991G, supporting regulatory requirements for modern applications. The PC826N's compliance status is listed as obsolete.

Electrical Performance: The YS8063 provides specified electrical parameters (6dBd gain, 2 VSWR, -10dB return loss, 300W power handling) that establish a defined performance baseline. The PC826N's electrical specifications are not provided in the available documentation, limiting direct performance comparison.

Frequently Asked Questions (FAQ)

Q: Can the YS8063 directly replace the PC826N in existing installations?

A: The YS8063 provides RF connector compatibility (N-type female) and operates within a frequency range that overlaps the PC826N's band. However, the YS8063 is 4.732 inches longer than the PC826N, requiring mechanical re-evaluation of mounting structures and spatial constraints. Frequency coverage above 896MHz is not supported by the YS8063, which may impact applications requiring full 880-960MHz coverage.

Q: What are the key differences between these two components?

A: The primary differences are: (1) Product status—PC826N is obsolete; YS8063 is active production; (2) Physical dimensions—YS8063 is significantly longer; (3) Frequency range—YS8063 covers 809-896MHz versus PC826N's 880-960MHz band; (4) Specified electrical parameters—YS8063 provides documented gain, VSWR, and power ratings; (5) Compliance—YS8063 is RoHS compliant with current ECCN classification.

Q: Are there frequency limitations when substituting the YS8063 for the PC826N?

A: Yes. The YS8063 operates up to 896MHz, while the PC826N band extends to 960MHz. Applications requiring operation in the 897-960MHz range cannot use the YS8063 as a direct substitute. Frequency response verification is required for applications operating near the upper edge of the PC826N band.

Q: What packaging and inventory considerations apply?

A: The YS8063 is available in bulk packaging with 980 pieces in current stock. The PC826N is obsolete with 1153 pieces remaining in inventory. For new designs and long-term applications, the YS8063 is the appropriate selection due to active production status and ongoing availability.

Q: Does the YS8063 meet modern regulatory requirements?

A: Yes. The YS8063 is RoHS compliant and carries ECCN classification 5A991G with HTSUS code 8517.71.0000, meeting current regulatory and export control requirements. The PC826N's regulatory status is listed as obsolete.