PC81713NIP1B Equivalent & Substitute Parts

Part Overview

The PC81713NIP1B is an optoisolator with transistor output manufactured by SHARP/Socle Technology. This component provides galvanic isolation up to 5000Vrms with a single channel configuration in a 4-SMD surface mount package. The part is currently active in production with 100,200 units in stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter range, enabling procurement flexibility and supply chain continuity.

Substiute Parts

PC81713NIP1B

SHARP/Socle TechnologyIn Stock: 100295PC81713NIP1B Datasheet

Current PartRFQ

PC81710NIP1B

SHARP/Socle TechnologyIn Stock: 10046PC81710NIP1B Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PC81713NIP1B is determined by strict equivalence across the following critical parameters:

• Voltage isolation rating: 5000Vrms
• Number of channels: 1
• Output type: Transistor
• Current transfer ratio range: 100% to 600% @ 500µA
• Maximum output voltage: 80V
• Maximum output current per channel: 50mA
• Maximum Vce saturation: 200mV
• Operating temperature range: -30°C ~ 100°C
• Package configuration: 4-SMD, Gull Wing surface mount

The PC81710NIP1B meets all these criteria and is classified as a parametric equivalent. Both parts share identical electrical specifications and mechanical compatibility, differing only in packaging format and supplier inventory designation.

Parameter Comparison

Engineering Selection Recommendations

Both PC81713NIP1B and PC81710NIP1B are active production components from SHARP/Socle Technology with identical electrical and mechanical specifications. Selection between these parts is based on packaging format and supply availability. The PC81713NIP1B is supplied in standard packaging, while the PC81710NIP1B is available in Cut Tape (CT) and Digi-Reel® formats. The PC81710NIP1B carries RoHS Compliance certification and MSL Level 1 (Unlimited) moisture sensitivity rating. Both parts are classified under ECCN EAR99 and HTSUS 8541.49.8000.

Frequently Asked Questions (FAQ)

Q: Can PC81710NIP1B be used as a direct replacement for PC81713NIP1B?

A: Yes. Both parts are parametric equivalents with identical isolation voltage (5000Vrms), channel configuration (1), output type (transistor), current transfer ratio range (100–600% @ 500µA), maximum output voltage (80V), maximum output current (50mA), and operating temperature range (-30°C ~ 100°C). The 4-SMD Gull Wing package is identical on both parts.

Q: What is the difference between these two part numbers?

A: The primary differences are packaging format and supplier designation. PC81710NIP1B is supplied in Cut Tape (CT) and Digi-Reel® formats, while PC81713NIP1B uses standard packaging. PC81710NIP1B includes RoHS Compliance certification and MSL Level 1 rating.

Q: Are there any electrical performance differences?

A: No. Both parts have identical electrical specifications including isolation voltage, current transfer ratio, output voltage rating, output current capacity, and saturation voltage.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. Both parts use the same 4-SMD Gull Wing surface mount package and have identical pin configurations and electrical characteristics.

Q: Which part should be selected for new designs?

A: Selection depends on procurement requirements and supply chain strategy. Both parts are active and in stock. PC81710NIP1B offers the advantage of RoHS compliance and standard tape/reel packaging formats commonly used in high-volume manufacturing.