PC81710NIP0X Equivalent & Substitute Parts

Part Overview

The PC81710NIP0X is a 5000Vrms optoisolator with transistor output, featuring single-channel isolation in a 4-SMD surface mount package. This component is discontinued at DiGi Electronics, necessitating identification of equivalent substitute parts that maintain identical electrical and mechanical specifications for continued system integration and procurement.

Substiute Parts

PC81710NIP0X

SHARP/Socle TechnologyIn Stock: 901PC81710NIP0X Datasheet

Current PartRFQ

PC81710NIP1B

SHARP/Socle TechnologyIn Stock: 10046PC81710NIP1B Datasheet

Parametric EquivalentRFQ

PC81713NIP1B

SHARP/Socle TechnologyIn Stock: 100295PC81713NIP1B Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PC81710NIP0X are qualified based on the following critical parameters that define functional equivalence:

• Voltage - Isolation: 5000Vrms (mandatory match)
• Number of Channels: 1 (mandatory match)
• Output Type: Transistor (mandatory match)
• Current Transfer Ratio Range: 100% - 600% @ 500µA (mandatory match)
• Voltage - Output (Max): 80V (mandatory match)
• Current - Output / Channel: 50mA (mandatory match)
• Package / Case: 4-SMD, Gull Wing (mandatory match)
• Mounting Type: Surface Mount (mandatory match)
• Operating Temperature Range: -30°C ~ 100°C (mandatory match)

The substitute parts PC81710NIP1B and PC81713NIP1B meet all specified electrical and mechanical parameters, enabling direct functional replacement in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

PC81710NIP1B is the primary substitute for PC81710NIP0X. This part maintains active product status and is available in standard packaging formats (Cut Tape and Digi-Reel). All electrical and mechanical parameters are identical to the original part number, with inventory availability of 9983 pieces.

PC81713NIP1B is an alternative substitute that meets all specified electrical and mechanical requirements. This part carries active product status with significantly higher inventory availability (100200 pieces). The base product number differs (PC81713 versus PC81710), but functional equivalence is maintained across all critical parameters.

Both substitute parts are RoHS compliant and carry identical ECCN and HTSUS classifications as the original part, supporting regulatory and compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can PC81710NIP1B and PC81713NIP1B be used interchangeably with PC81710NIP0X?

A: Yes. Both substitute parts match all specified electrical parameters (5000Vrms isolation, 1 channel, transistor output, 50mA output current, 80V maximum output voltage) and mechanical specifications (4-SMD Gull Wing package, surface mount). They are functionally equivalent for circuit applications.

Q: What is the difference between PC81710NIP1B and PC81713NIP1B?

A: The parts differ in base product number designation (PC81710 versus PC81713) and inventory availability. PC81713NIP1B has higher stock levels (100200 pieces versus 9983 pieces). All electrical and mechanical parameters are identical. Moisture sensitivity level is specified for PC81710NIP1B but not provided for PC81713NIP1B.

Q: Are there packaging differences between the substitute parts?

A: PC81710NIP1B is available in Cut Tape (CT) and Digi-Reel packaging formats. PC81713NIP1B packaging information is not specified in available data. Both use the same 4-SMD Gull Wing package configuration suitable for surface mount assembly.

Q: Do the substitute parts maintain RoHS compliance?

A: Yes. Both PC81710NIP1B and PC81713NIP1B are RoHS compliant, matching the compliance status of the original PC81710NIP0X part.

Q: What is the operating temperature range for these optoisolators?

A: All three parts operate across -30°C to 100°C, supporting standard industrial and commercial temperature environments.