PC2SD11NXPAF Equivalent & Substitute Parts

Part Overview

The PC2SD11NXPAF is a 5kV optoisolator with triac output manufactured by Sharp Microelectronics in 6-SMD surface mount packaging. This component is actively produced and stocked with 1043 units available. The device functions as an optoisolator output channel for applications requiring galvanic isolation with triac switching capability. Substitute parts are identified when equivalent isolation voltage ratings, output types, and packaging configurations are available from alternative manufacturers, enabling procurement flexibility and supply chain continuity.

Substiute Parts

PC2SD11NXPAF

Sharp MicroelectronicsIn Stock: 1138PC2SD11NXPAF Datasheet

Current PartRFQ

VO3052-X007T

Vishay Semiconductor Opto DivisionIn Stock: 2144VO3052-X007T Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The VO3052-X007T from Vishay Semiconductor Opto Division qualifies as a substitute based on the following alignment criteria:

• Isolation Voltage: Both parts operate at 5kV-class isolation (PC2SD11NXPAF: 5kV; VO3052-X007T: 5.3kV). The VO3052-X007T exceeds the minimum isolation requirement.
• Output Type: Both devices feature triac output configuration for AC switching applications.
• Package Type: Both use 6-SMD surface mount packaging, enabling direct PCB footprint compatibility.
• Functional Category: Both are optoisolators designed for galvanic isolation in electronic circuits.
• Product Status: Both are actively manufactured and in stock.
• Regulatory Classification: Both share identical ECCN (EAR99) and HTSUS (8541.49.8000) codes.

Parameter Comparison

Engineering Selection Recommendations

Both the PC2SD11NXPAF and VO3052-X007T are suitable for applications requiring 5kV-class optoisolator triac output in 6-SMD packaging. Selection between these parts should consider the following factors:

RoHS Compliance: The VO3052-X007T is ROHS3 compliant, while the PC2SD11NXPAF is RoHS non-compliant. Applications subject to RoHS regulations must use the VO3052-X007T.

Isolation Voltage Margin: The VO3052-X007T provides 5.3kV isolation, exceeding the 5kV specification of the PC2SD11NXPAF. This additional margin may be beneficial in high-voltage stress environments.

Packaging Format: The PC2SD11NXPAF is supplied in Cut Tape and Digi-Reel format, while the VO3052-X007T uses standard Tape & Reel packaging. Procurement and assembly processes should account for these packaging differences.

Inventory Availability: The VO3052-X007T has higher stock availability (2039 units) compared to the PC2SD11NXPAF (1043 units).

Both parts share identical regulatory classifications (ECCN and HTSUS codes) and unlimited moisture sensitivity levels, ensuring equivalent handling and storage requirements.

Frequently Asked Questions (FAQ)

Q: Can the VO3052-X007T directly replace the PC2SD11NXPAF on existing PCBs?

A: Yes. Both parts use identical 6-SMD surface mount packaging, enabling direct footprint compatibility without PCB redesign.

Q: What is the primary difference between these two optoisolators?

A: The VO3052-X007T provides higher isolation voltage (5.3kV vs. 5kV) and is ROHS3 compliant, while the PC2SD11NXPAF is RoHS non-compliant. Both function identically as single-channel triac output optoisolators.

Q: Are there packaging considerations when switching between these parts?

A: Yes. The PC2SD11NXPAF is supplied in Cut Tape and Digi-Reel format, while the VO3052-X007T uses standard Tape & Reel packaging. Assembly equipment and procurement workflows may require adjustment based on the selected packaging format.

Q: Which part should be selected for RoHS-regulated applications?

A: The VO3052-X007T is ROHS3 compliant and must be used for applications subject to RoHS directives. The PC2SD11NXPAF is not RoHS compliant and is unsuitable for such applications.

Q: Do both parts have the same moisture sensitivity requirements?

A: Yes. Both parts have MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage and handling.

Q: Are the regulatory classifications identical for both parts?

A: Yes. Both parts share the same ECCN (EAR99) and HTSUS (8541.49.8000) classifications, ensuring equivalent export and tariff treatment.