PC20LGN Power Drawer Contact Equivalent & Substitute Parts

Part Overview

The PC20LGN is an active power contact pin manufactured by Anderson Power Products, Inc., designed for use in Power Drawer® backplane connector systems. This component is a gold-plated crimp termination contact rated for 20 AWG wire and 5 amperes continuous current. The part is maintained in active production status with 939 units currently in stock.

Equivalent and substitute parts are identified to provide design flexibility, support supply chain continuity, and accommodate connector system compatibility requirements across different manufacturer platforms while maintaining electrical and mechanical performance specifications.

Substiute Parts

PC20LGN

Anderson Power Products, Inc.In Stock: 1022PC20LGN Datasheet

Current PartRFQ

1650162-2

TE Connectivity AMP ConnectorsIn Stock: 25371650162-2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PC20LGN is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Wire Gauge: 20 AWG (determines conductor cross-section and current capacity)
• Current Rating: 5 A (maximum continuous current specification)
• Contact Finish: Gold (ensures electrical conductivity and corrosion resistance)
• Contact Termination: Crimp (mechanical attachment method to wire)

Mechanical Compatibility Parameters:

• Pin or Socket: Pin (contact gender and mating interface)
• Category: Backplane Connectors (connector system classification)

Regulatory and Compliance Parameters:

• RoHS Status: ROHS3 Compliant or RoHS Compliant (hazardous substance restrictions)
• Moisture Sensitivity Level: 1 (Unlimited) (storage and handling requirements)
• ECCN: EAR99 (export control classification)
• HTSUS Code: 8536.90.4000 (tariff classification)

Substitute parts must match all electrical and mechanical parameters. Compliance certifications must be equivalent or more stringent than the original specification.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors part number 1650162-2 is functionally equivalent to the PC20LGN based on matching electrical and mechanical specifications. Both parts are active production items with established supply availability.

Compliance Equivalence: The 1650162-2 carries RoHS Compliant status, which satisfies the ROHS3 Compliant requirement of the PC20LGN. Both parts maintain identical Moisture Sensitivity Level 1 (Unlimited) classification, permitting unrestricted storage and handling conditions. Export control classification (EAR99) and tariff codes (8536.90.4000) are identical across both parts.

Electrical and Mechanical Equivalence: Both contacts are gold-plated power pins with crimp termination designed for 20 AWG wire at 5 amperes continuous current. Contact geometry and mating interface specifications are compatible within backplane connector system applications.

Supply Considerations: The 1650162-2 maintains higher inventory availability (2,454 units in stock) compared to the PC20LGN (939 units in stock), supporting extended lead time mitigation and production continuity planning.

Frequently Asked Questions (FAQ)

Q: Can the 1650162-2 be used as a direct replacement for the PC20LGN in existing designs?

A: Yes. Both parts meet identical electrical specifications (5 A, 20 AWG, gold contact finish, crimp termination) and mechanical requirements (pin configuration, backplane connector category). Compliance certifications are equivalent. Physical compatibility depends on connector housing design; verify mating interface dimensions with the specific connector system documentation.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by matching wire gauge (20 AWG), current rating (5 A), contact finish (gold), termination method (crimp), contact gender (pin), and connector category (backplane). Regulatory compliance must be equivalent or more stringent. All identified parameters must align for functional equivalence.

Q: Are there differences in contact finish thickness between these parts?

A: The PC20LGN specification does not include contact finish thickness data. The 1650162-2 specifies 10.0µin (0.25µm) gold plating thickness. Both parts provide gold contact finish for electrical conductivity and corrosion resistance. Finish thickness differences do not affect substitution eligibility when both parts meet the same current and voltage requirements.

Q: What is the difference between ROHS3 Compliant and RoHS Compliant status?

A: ROHS3 Compliant refers to compliance with the third iteration of the Restriction of Hazardous Substances Directive (RoHS 3 / 2015/863/EU). RoHS Compliant indicates compliance with the RoHS Directive. Both designations restrict hazardous substances in electrical and electronic equipment. For substitution purposes, both statuses are considered equivalent in meeting hazardous substance restrictions.

Q: Does REACH Affected status on the 1650162-2 impact substitution?

A: REACH Affected status indicates the part is subject to the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) regulation. The PC20LGN is listed as REACH Unaffected. This difference reflects regulatory jurisdiction and does not affect electrical or mechanical compatibility. Substitution is valid; however, supply chain documentation and compliance verification procedures may differ between parts.

Q: What is the significance of Moisture Sensitivity Level 1 (Unlimited)?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity restrictions. Both parts can be stored and handled without special humidity control, desiccant packaging, or bake-out procedures prior to assembly. This classification simplifies inventory management and reduces handling costs.

Q: Are these parts interchangeable in all backplane connector applications?

A: Electrical and mechanical interchangeability is confirmed based on provided specifications. However, connector housing compatibility depends on the specific backplane connector system design. Verify that the mating connector accepts both Anderson Power Drawer® and TE Connectivity ELCON series contacts. Consult connector system documentation for physical interface requirements.