PBSS5360PASX Equivalent & Substitute Parts

Part Overview

The PBSS5360PASX is an automotive-grade PNP bipolar junction transistor manufactured by Nexperia USA Inc. This surface mount device operates at 60 V maximum collector-emitter breakdown voltage with a maximum collector current of 3 A and delivers 600 mW power dissipation. The transistor is qualified to AEC-Q101 automotive standards and is RoHS3 compliant. The part is currently in active production status. Substitute parts are identified to support procurement continuity, inventory management, and design flexibility while maintaining electrical and mechanical compatibility.

Substiute Parts

PBSS5360PASX

Nexperia USA Inc.In Stock: 4096PBSS5360PASX Datasheet

Current PartRFQ

PBSS5360PAS-QX

Nexperia USA Inc.In Stock: 1971PBSS5360PAS-QX Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PBSS5360PASX is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Transistor Type: PNP
• Voltage - Collector Emitter Breakdown (Max): 60 V
• Current - Collector (Ic) (Max): 3 A
• Power - Max: 600 mW
• Frequency - Transition: 120 MHz
• Vce Saturation (Max): 450 mV @ 300 mA, 3 A

Mechanical Parameters (Must Match):

• Package / Case: 3-UDFN Exposed Pad
• Supplier Device Package: DFN2020D-3
• Mounting Type: Surface Mount

Compliance Parameters (Must Match):

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The substitute part PBSS5360PAS-QX meets all critical electrical, mechanical, and compliance requirements and is therefore electrically and mechanically interchangeable with the PBSS5360PASX.

Parameter Comparison

Engineering Selection Recommendations

The PBSS5360PAS-QX is a direct substitute for the PBSS5360PASX. Both parts are manufactured by Nexperia USA Inc., hold active product status, and carry identical automotive-grade AEC-Q101 qualification. Both devices are RoHS3 compliant with MSL 1 rating, indicating no moisture sensitivity restrictions during storage and handling.

The parts are electrically equivalent across all critical operating parameters: 60 V breakdown voltage, 3 A maximum collector current, 600 mW power dissipation, and 120 MHz transition frequency. The Vce saturation specification is identical at both test points. Both devices are packaged in the 3-UDFN Exposed Pad (DFN2020D-3) surface mount package, ensuring mechanical and thermal compatibility on printed circuit boards.

The DC current gain (hFE) specifications are measured at different test conditions (PBSS5360PASX at 2 A, 5 V versus PBSS5360PAS-QX at 50 mA, 5 V), but both meet minimum gain requirements within their respective operating ranges. This difference reflects standard parametric characterization practices and does not affect substitution eligibility.

Selection between these parts is based on inventory availability and procurement lead time, as both are functionally and mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: Can PBSS5360PAS-QX be used as a direct replacement for PBSS5360PASX in automotive applications?

A: Yes. Both parts are AEC-Q101 qualified automotive-grade transistors with identical electrical ratings (60 V, 3 A, 600 mW), matching package specifications (DFN2020D-3), and equivalent compliance certifications (RoHS3, REACH Unaffected). They are electrically and mechanically interchangeable.

Q: Are there any differences in the DC current gain specifications between these parts?

A: The DC current gain (hFE) is specified at different test conditions. PBSS5360PASX specifies hFE minimum of 100 @ 2 A, 5 V, while PBSS5360PAS-QX specifies hFE minimum of 150 @ 50 mA, 5 V. Both specifications are valid within their respective operating ranges and do not prevent substitution. The different test points reflect standard characterization practices for this device family.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both PBSS5360PASX and PBSS5360PAS-QX carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Both parts can be stored and handled without special moisture control measures.

Q: Are the package dimensions and pin configurations identical?

A: Yes. Both parts use the 3-UDFN Exposed Pad package (DFN2020D-3) with identical footprints, pin configurations, and thermal characteristics. No PCB layout modifications are required when substituting between these parts.

Q: What is the maximum operating temperature for both parts?

A: Both parts are rated for a maximum junction temperature (TJ) of 175°C, providing equivalent thermal performance in automotive applications.

Q: Are both parts RoHS compliant?

A: Yes. Both PBSS5360PASX and PBSS5360PAS-QX are RoHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for automotive and industrial applications.