PBLS1504V,115 Equivalent & Substitute Parts Reference

Part Overview

The PBLS1504V,115 is a pre-biased bipolar junction transistor (BJT) component, containing one NPN pre-biased transistor and one PNP transistor in a surface mount SOT-666 package. It features a collector-emitter breakdown voltage of 50V (NPN), 15V (PNP), and collector currents of 100mA (NPN), 500mA (PNP). The device is RoHS3 compliant, surface mountable, and supplied in tape & reel packaging. Its current part status is Obsolete, making it necessary to identify alternative models for sustaining manufacturing, repair, and inventory continuity.

Substiute Parts

PBLS1504V,115

NXP USA Inc.In Stock: 1109PBLS1504V,115 Datasheet

Current PartRFQ

PBLS1504Y,115

NXP SemiconductorsIn Stock: 75269PBLS1504Y,115 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part identification is strictly based on matching the following key electrical and mechanical parameters:

• Transistor configuration: 1 NPN pre-biased, 1 PNP
• Maximum collector current: 100mA (NPN), 500mA (PNP)
• Maximum collector-emitter breakdown voltage: 50V (NPN), 15V (PNP)
• Integrated resistor values (R1 and R2): 22kOhms each
• DC current gain (hFE), Vce saturation, and cutoff current
• Transition frequency (280MHz)
• Maximum power dissipation: 300mW
• Surface mount packaging and device outline compatibility
• Moisture Sensitivity Level and RoHS/REACH compliance

Parts listed as substitutes display these same values, ensuring direct electrical and mechanical compatibility within the specified category.

Parameter Comparison

Engineering Selection Recommendations

PBLS1504V,115 is obsolete, while PBLS1504Y,115 is active according to provided part status information. Both devices are RoHS/REACH compliant and share identical key electrical and mechanical parameters, supporting direct substitution where applicable package footprints are acceptable under assembly constraints.

Frequently Asked Questions (FAQ)

Q1: What are the critical parameters for substituting PBLS1504V,115 with another transistor?

• Substitute devices must precisely match transistor type, maximum collector/emitter voltages, maximum collector currents, integrated resistor values, saturation and cutoff characteristics, power rating, and mounting style.

Q2: Is PBLS1504Y,115 electrically and mechanically equivalent to PBLS1504V,115?

• Based on the input data, PBLS1504Y,115 provides direct electrical equivalence. The main distinction is package outline: PBLS1504V,115 is supplied in SOT-666, while PBLS1504Y,115 is offered in 6-TSSOP, SC-88, and SOT-363 packages.

Q3: Does RoHS or REACH compliance affect my substitute selection?

• Both PBLS1504V,115 and PBLS1504Y,115 share RoHS and REACH compliance, satisfying relevant environmental and safety requirements.

Q4: Does changing package type impact substitution?

• Mechanical compatibility depends on the PCB footprint; package changes (e.g., SOT-666 to 6-TSSOP or SC-88) must be confirmed to ensure proper fit during board assembly. No electrical parameter variation exists within the provided data.

Q5: What does the part status mean for future availability?

• PBLS1504V,115 is obsolete, so sustained availability cannot be ensured. PBLS1504Y,115 is listed as active, indicating it is currently supported in production and inventory.