PAG.M1.4GL.AC65Z Equivalent & Substitute Parts

Part Overview

The PAG.M1.4GL.AC65Z is a 14-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 775 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit equivalent configurations.

Substiute Parts

PAG.M1.4GL.AC65Z

LEMOIn Stock: 870PAG.M1.4GL.AC65Z Datasheet

Current PartRFQ

S21M07-P14MCC0-657S

ODUIn Stock: 853S21M07-P14MCC0-657S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part S21M07-P14MCC0-657S from ODU is classified as an equivalent based on the following critical parameters that determine substitution compatibility:

• 14-position connector configuration
• Male pin plug connector type
• Solder cup termination method
• Polysulfone shell material
• Gold contact finish
• IP50 ingress protection rating
• Identical cable opening dimensions (0.209" ~ 0.256")
• Push-pull fastening mechanism
• PEEK insert material
• ROHS3 compliance and REACH unaffected status

The substitute maintains functional and mechanical compatibility within the specified parameter set. Differences in current rating (2.5A vs 2A), operating temperature upper limit (120°C vs 150°C), and fastening type detail (Push-Pull vs Push-Pull with Detent Lock) represent variations that must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the PAG.M1.4GL.AC65Z and S21M07-P14MCC0-657S are active production parts with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial, medical, and automotive applications.

The PAG.M1.4GL.AC65Z provides a higher operating temperature ceiling of 150°C and includes detent lock fastening, suitable for applications requiring enhanced thermal performance and positive connection retention.

The S21M07-P14MCC0-657S offers increased current capacity at 2.5A and includes strain relief features, appropriate for applications with higher current demands and requiring additional cable strain management.

Selection between these parts depends on application-specific requirements for operating temperature range, current capacity, and fastening mechanism. Both parts maintain identical mechanical interfaces and electrical contact specifications within their respective rated parameters.

Frequently Asked Questions (FAQ)

Q: Can S21M07-P14MCC0-657S directly replace PAG.M1.4GL.AC65Z in existing designs?

A: Direct replacement is possible when application requirements fall within the S21M07-P14MCC0-657S specifications. The substitute part maintains 14-position configuration, solder cup termination, and identical cable opening dimensions. However, applications operating above 120°C or requiring detent lock fastening must retain the original PAG.M1.4GL.AC65Z specification.

Q: What are the key differences between these connector models?

A: The primary differences are operating temperature range (PAG.M1.4GL.AC65Z: -50°C to 150°C; S21M07-P14MCC0-657S: -50°C to 120°C), current rating (2A vs 2.5A), and fastening mechanism (detent lock vs standard push-pull). Both maintain identical 14-position configuration, solder cup termination, and cable opening specifications.

Q: Are both parts compliant with current regulatory standards?

A: Both PAG.M1.4GL.AC65Z and S21M07-P14MCC0-657S are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for industrial and medical applications.

Q: What is the significance of the cable opening specification?

A: The cable opening range of 0.209" to 0.256" (5.30mm to 6.50mm) is identical for both parts, ensuring compatible backshell and strain relief configurations. This parameter is critical for mechanical assembly and cable retention.

Q: How do the shell materials compare?

A: Both connectors use Polysulfone (PSU) for shell and backshell construction, providing equivalent mechanical strength, chemical resistance, and thermal stability within their respective operating temperature ranges.