PAG.M0.6GL.AC65Z Equivalent & Substitute Parts

Part Overview

The PAG.M0.6GL.AC65Z is a 6-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 671 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component interchange based on electrical and mechanical compatibility.

Substiute Parts

PAG.M0.6GL.AC65Z

LEMOIn Stock: 730PAG.M0.6GL.AC65Z Datasheet

Current PartRFQ

S21M07-P06MFG0-657S

ODUIn Stock: 778S21M07-P06MFG0-657S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PAG.M0.6GL.AC65Z with the S21M07-P06MFG0-657S is permissible based on the following alignment of critical parameters:

Matching Parameters:

• Connector type: Both are plug connectors with male pins
• Number of positions: Both feature 6-position configuration
• Termination method: Both utilize solder cup termination
• Shell material: Both constructed from Polysulfone (PSU)
• Contact finish: Both employ gold mating surface finish
• Ingress protection: Both rated IP50 - Dust Protected
• Cable opening range: Both accommodate 0.209" ~ 0.256" (5.30mm ~ 6.50mm)
• Insert material: Both use Polyetheretherketone (PEEK)
• Mounting type: Both are free hanging (in-line)
• Compliance: Both ROHS3 compliant and REACH unaffected
• Moisture sensitivity: Both rated MSL 1 (Unlimited)

Differing Parameters:

• Current rating: PAG.M0.6GL.AC65Z rated 6A; S21M07-P06MFG0-657S rated 4.55A
• Operating temperature maximum: PAG.M0.6GL.AC65Z rated to 150°C; S21M07-P06MFG0-657S rated to 120°C
• Fastening type: PAG.M0.6GL.AC65Z includes detent lock; S21M07-P06MFG0-657S uses push-pull only
• Features: S21M07-P06MFG0-657S includes strain relief in addition to backshell

Parameter Comparison

Engineering Selection Recommendations

Both the PAG.M0.6GL.AC65Z and S21M07-P06MFG0-657S maintain active product status and full compliance with ROHS3 and REACH requirements. Selection between these parts depends on application-specific electrical and thermal requirements.

The PAG.M0.6GL.AC65Z is suitable for applications requiring the full 6A current capacity and extended operating temperature range to 150°C. The detent lock fastening mechanism provides additional mechanical security in high-vibration or high-movement environments.

The S21M07-P06MFG0-657S is suitable for applications with current requirements not exceeding 4.55A and operating temperatures within the -50°C to 120°C range. The inclusion of strain relief provides enhanced cable protection at the termination point. This part is available in bulk packaging.

Both connectors are appropriate for industrial, medical, and testing equipment applications where the specified electrical and thermal parameters align with system requirements.

Frequently Asked Questions (FAQ)

Q: Can the S21M07-P06MFG0-657S be used as a direct replacement for the PAG.M0.6GL.AC65Z?

A: Substitution is permissible only when application requirements do not exceed the S21M07-P06MFG0-657S electrical and thermal specifications. The substitute part is rated for 4.55A maximum current and 120°C maximum operating temperature, compared to 6A and 150°C for the primary part. Verify that your application current draw and thermal environment remain within these limits.

Q: What is the significance of the detent lock feature on the PAG.M0.6GL.AC65Z?

A: The detent lock provides mechanical retention of the mated connector pair beyond the push-pull fastening mechanism. This feature is specified only on the PAG.M0.6GL.AC65Z. Applications requiring positive mechanical locking should use the primary part.

Q: Are the cable opening dimensions identical between both parts?

A: Yes. Both connectors accommodate cable diameters within the 0.209" to 0.256" (5.30mm to 6.50mm) range, ensuring compatible cable termination.

Q: What is the difference in contact material between these parts?

A: The PAG.M0.6GL.AC65Z contact material is not specified in the provided data. The S21M07-P06MFG0-657S uses brass contacts with gold mating finish. Both parts feature gold contact finish for mating surfaces.

Q: Do both connectors support the same applications?

A: Both parts are suitable for industrial, medical, and testing equipment applications. The PAG.M0.6GL.AC65Z additionally lists automotive applications. Confirm application compatibility based on the electrical and thermal parameter alignment discussed in the Engineering Selection Recommendations section.

Q: What packaging options are available?

A: The PAG.M0.6GL.AC65Z is available in standard packaging with 671 units in current stock. The S21M07-P06MFG0-657S is available in bulk packaging with 765 units in current stock.