PAG.M0.5GL.AC65Z Equivalent & Substitute Parts

Part Overview

The PAG.M0.5GL.AC65Z is a 5-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 789 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit equivalent functionality.

Substiute Parts

PAG.M0.5GL.AC65Z

LEMOIn Stock: 799PAG.M0.5GL.AC65Z Datasheet

Current PartRFQ

S21M07-P05MJG0-657S

ODUIn Stock: 849S21M07-P05MJG0-657S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PAG.M0.5GL.AC65Z is determined by the following critical parameters:

• Connector Type & Position Count: Must be plug with male pins in 5-position configuration
• Termination Method: Solder cup termination required for PCB assembly compatibility
• Shell Material & Finish: Polysulfone (PSU) shell with gold contact finish for environmental and electrical performance
• Mechanical Interface: Push-pull fastening with compatible shell size and cable opening range
• Electrical Performance: Current rating and operating temperature range must meet or exceed application requirements
• Compliance: RoHS3 compliance and REACH unaffected status required

The substitute part S21M07-P05MJG0-657S meets these core substitution criteria while maintaining functional equivalence for the specified applications.

Parameter Comparison

Engineering Selection Recommendations

Both the PAG.M0.5GL.AC65Z and S21M07-P05MJG0-657S are active production parts with ROHS3 compliance and REACH unaffected status, making them suitable for regulated applications in medical, industrial, and automotive sectors.

The PAG.M0.5GL.AC65Z offers an extended operating temperature range of -50°C to 150°C, making it the preferred choice for applications requiring operation at elevated temperatures. The S21M07-P05MJG0-657S operates within -50°C to 120°C and provides a higher current rating of 7.5A compared to the 7A rating of the primary part.

Selection between these parts should be based on specific application temperature requirements and current demands. Both parts share identical mechanical interfaces, cable opening specifications, and shell materials, ensuring physical and electrical compatibility within their respective operating ranges.

Frequently Asked Questions (FAQ)

Q: Can S21M07-P05MJG0-657S be used as a direct replacement for PAG.M0.5GL.AC65Z?

A: Yes, for applications operating within the -50°C to 120°C temperature range. Both connectors share identical 5-position solder cup configuration, PSU shell material, gold contact finish, cable opening dimensions, and IP50 ingress protection. The substitute part provides equivalent mechanical and electrical performance within its specified operating temperature limits.

Q: What is the key difference between these two connector models?

A: The primary differences are operating temperature range and current rating. The PAG.M0.5GL.AC65Z supports -50°C to 150°C with 7A current rating, while the S21M07-P05MJG0-657S supports -50°C to 120°C with 7.5A current rating. Applications requiring temperatures above 120°C must use the LEMO part.

Q: Are both parts compliant with regulatory requirements?

A: Yes. Both PAG.M0.5GL.AC65Z and S21M07-P05MJG0-657S are ROHS3 compliant and REACH unaffected, meeting regulatory requirements for medical, industrial, and automotive applications.

Q: What is the significance of the solder cup termination?

A: Solder cup termination allows direct soldering of cable conductors to the connector contacts, providing a permanent mechanical and electrical connection suitable for PCB assembly and field wiring applications.

Q: Do these connectors require specific backshell or strain relief components?

A: Both connectors feature backshell design. The S21M07-P05MJG0-657S includes integrated strain relief, while the PAG.M0.5GL.AC65Z backshell is constructed from Polysulfone (PSU) material. Compatibility with external strain relief components should be verified based on cable diameter specifications.