PAG.M0.2GL.AC65Z Equivalent & Substitute Parts

Part Overview

The PAG.M0.2GL.AC65Z is a 2-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 721 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for component procurement, inventory management, or design flexibility across compatible connector families.

Substiute Parts

PAG.M0.2GL.AC65Z

LEMOIn Stock: 755PAG.M0.2GL.AC65Z Datasheet

Current PartRFQ

S21M07-P02MPH0-657S

ODUIn Stock: 1134S21M07-P02MPH0-657S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PAG.M0.2GL.AC65Z is determined by strict alignment of the following parameters:

• Connector Configuration: 2-position plug with male pins and solder cup termination
• Shell Material: Polysulfone (PSU) construction
• Contact Finish: Gold-plated mating surfaces
• Mounting Interface: Free hanging in-line configuration with push-pull fastening
• Environmental Protection: IP50 dust protection rating
• Cable Accommodation: 0.209" to 0.256" (5.30mm to 6.50mm) cable opening range
• Regulatory Compliance: ROHS3 compliant status

The substitute part S21M07-P02MPH0-657S from ODU meets these core electrical and mechanical compatibility criteria, enabling direct functional replacement in applications where the PAG.M0.2GL.AC65Z is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the PAG.M0.2GL.AC65Z and S21M07-P02MPH0-657S maintain active product status and full ROHS3 compliance, supporting continued use in regulated applications. The substitute part demonstrates higher current capacity (14A versus 10A) and includes integrated strain relief features. The operating temperature maximum of the substitute part is 120°C compared to 150°C for the primary part; applications requiring sustained operation above 120°C must retain the PAG.M0.2GL.AC65Z. Both parts carry EAR99 export classification and REACH unaffected status, maintaining equivalent regulatory standing for international deployment.

Frequently Asked Questions (FAQ)

Q: Can S21M07-P02MPH0-657S replace PAG.M0.2GL.AC65Z in all applications?

A: Functional replacement is supported for applications operating within -50°C to 120°C. Applications requiring sustained operation above 120°C must use the PAG.M0.2GL.AC65Z due to its 150°C maximum operating temperature.

Q: What are the key compatibility factors between these two connectors?

A: Both connectors share identical 2-position configuration, solder cup termination, PSU shell material, gold contact finish, IP50 protection, and cable opening dimensions. These parameters establish mechanical and electrical interchangeability.

Q: Does the higher current rating of the substitute part affect compatibility?

A: The 14A rating of S21M07-P02MPH0-657S exceeds the 10A requirement of PAG.M0.2GL.AC65Z. Higher current capacity does not compromise compatibility; it provides additional margin for applications with variable load conditions.

Q: Are there differences in fastening mechanisms between these parts?

A: The PAG.M0.2GL.AC65Z includes detent lock in addition to push-pull fastening, while S21M07-P02MPH0-657S uses push-pull fastening alone. Both mechanisms provide secure mating; applications requiring detent lock retention must specify the LEMO part.

Q: What is the inventory status for each part?

A: PAG.M0.2GL.AC65Z has 721 units in stock; S21M07-P02MPH0-657S has 1119 units available. Both parts are in active production status.