PAB.M1.4GL.AC65G Equivalent & Substitute Parts

Part Overview

The PAB.M1.4GL.AC65G is a 14-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 1106 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit equivalent configurations.

Substiute Parts

PAB.M1.4GL.AC65G

LEMOIn Stock: 1125PAB.M1.4GL.AC65G Datasheet

Current PartRFQ

S11MC7-P14MCC0-6570

ODUIn Stock: 1021S11MC7-P14MCC0-6570 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PAB.M1.4GL.AC65G is determined by the following critical parameters:

• Connector Type & Position Count: Must be plug configuration with 14 positions
• Termination Method: Solder cup termination required
• Shell Material: Polysulfone (PSU) construction
• Contact Finish: Gold-plated mating surfaces
• Fastening Mechanism: Push-pull connection system
• Current Rating: Minimum 2A capacity
• Operating Temperature: Must support -50°C minimum; upper limit flexibility permitted within industrial ranges
• Ingress Protection: IP50 or equivalent dust protection
• Compliance: ROHS3 compliant, REACH unaffected status

The identified substitute part S11MC7-P14MCC0-6570 (ODU MEDI-SNAP®) meets these core substitution criteria with documented compatibility in the connector interface specifications.

Parameter Comparison

Engineering Selection Recommendations

Primary Part - PAB.M1.4GL.AC65G (LEMO)

• Active production status with 1106 units in stock
• ROHS3 compliant and REACH unaffected
• Operating temperature range -50°C to 150°C supports extended thermal applications
• Established in automotive, industrial, medical, and testing equipment markets

Substitute Part - S11MC7-P14MCC0-6570 (ODU MEDI-SNAP®)

• Active production status with 928 units in stock
• ROHS3 compliant and REACH unaffected
• Current rating of 2.5A exceeds primary part specification
• Operating temperature range -50°C to 120°C is suitable for standard industrial and medical applications
• ODU MEDI-SNAP® series provides proven reliability in medical device applications

Selection between these parts should be based on application-specific thermal requirements. Applications requiring sustained operation above 120°C must use the primary PAB.M1.4GL.AC65G part. For applications within the -50°C to 120°C range, both parts are functionally equivalent.

Frequently Asked Questions (FAQ)

Q: Can S11MC7-P14MCC0-6570 be used as a direct replacement for PAB.M1.4GL.AC65G?

A: Yes, for applications operating within -50°C to 120°C. Both connectors share identical 14-position solder cup configuration, gold-plated contacts, polysulfone shell construction, and IP50 ingress protection. The substitute part provides higher current capacity (2.5A vs 2A). Applications requiring operation above 120°C must use the primary part.

Q: What are the key compatibility criteria for these connector substitutes?

A: Compatibility is determined by: 14-position count, male plug configuration, solder cup termination, polysulfone shell material, gold contact finish, push-pull fastening, minimum 2A current rating, IP50 protection, and ROHS3/REACH compliance status.

Q: Are there differences in mechanical fastening between these parts?

A: The primary part includes detent lock in addition to push-pull fastening, while the substitute provides push-pull fastening. Both mechanisms ensure secure connection in the specified applications.

Q: What is the contact material difference between these parts?

A: The primary PAB.M1.4GL.AC65G does not specify contact material in the provided data. The substitute S11MC7-P14MCC0-6570 uses brass contacts with gold plating. Both achieve equivalent gold-plated mating surface finish.

Q: Are both parts suitable for medical device applications?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected. The substitute part is specifically designated for the ODU MEDI-SNAP® medical series, indicating validated use in medical equipment. The primary part is also listed for medical applications.

Q: What inventory considerations apply to these parts?

A: PAB.M1.4GL.AC65G has 1106 units in stock (bulk packaging). S11MC7-P14MCC0-6570 has 928 units in stock (bulk packaging). Both maintain active production status.