PAB.M0.2GL.AC65G Equivalent & Substitute Parts

Part Overview

The PAB.M0.2GL.AC65G is a 2-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable push-pull detent lock fastening in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 989 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit equivalent configurations.

Substiute Parts

PAB.M0.2GL.AC65G

LEMOIn Stock: 1071PAB.M0.2GL.AC65G Datasheet

Current PartRFQ

S11MC7-P02MPH0-6570

ODUIn Stock: 1096S11MC7-P02MPH0-6570 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part S11MC7-P02MPH0-6570 (ODU MEDI-SNAP®) qualifies as an equivalent based on the following critical parameters:

Matching Parameters:

• Connector type: Plug, Male Pins
• Number of positions: 2
• Termination method: Solder Cup
• Contact finish: Gold
• Mounting type: Free Hanging (In-Line)
• Ingress protection: IP50 - Dust Protected
• Cable opening range: 0.209" ~ 0.256" (5.30mm ~ 6.50mm)
• Shell material: Polysulfone (PSU)
• Insert material: Polyetheretherketone (PEEK)
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Differing Parameters:

• Current rating: 14A (substitute) vs. 10A (main part)
• Operating temperature upper limit: 120°C (substitute) vs. 150°C (main part)
• Fastening type: Push-Pull (substitute) vs. Push-Pull, Detent Lock (main part)
• Orientation: C (substitute) vs. B (main part)
• Series designation: ODU MEDI-SNAP® (substitute) vs. 1P (main part)

Substitution is valid when the application does not require the detent lock feature, operates below 120°C, and the 14A current rating is acceptable.

Parameter Comparison

Engineering Selection Recommendations

Both the PAB.M0.2GL.AC65G and S11MC7-P02MPH0-6570 are active products with ROHS3 compliance and REACH unaffected status, making them suitable for regulated applications in industrial, medical, and automotive sectors.

Selection between these parts depends on application-specific requirements:

Select PAB.M0.2GL.AC65G when:

• Detent lock fastening is required for secure connection
• Operating temperatures up to 150°C are necessary
• 10A current rating is sufficient for the application

Select S11MC7-P02MPH0-6570 when:

• Push-pull fastening without detent lock is acceptable
• Operating temperatures do not exceed 120°C
• Higher current capacity (14A) is beneficial
• ODU MEDI-SNAP® series compatibility is required

Both connectors maintain identical ingress protection, cable opening specifications, and material composition, ensuring mechanical and environmental compatibility in equivalent applications.

Frequently Asked Questions (FAQ)

Q: Can S11MC7-P02MPH0-6570 be used as a direct replacement for PAB.M0.2GL.AC65G?

A: Substitution is valid only when the application does not require detent lock fastening and operates within the 120°C temperature limit. The higher current rating of the substitute part does not prevent its use in lower-current applications.

Q: What is the significance of the detent lock difference?

A: The PAB.M0.2GL.AC65G includes detent lock fastening, which provides positive mechanical engagement and prevents accidental disconnection. The S11MC7-P02MPH0-6570 uses standard push-pull fastening without this locking feature. Applications requiring secure, vibration-resistant connections must use the detent lock variant.

Q: Are there temperature limitations when substituting?

A: Yes. The S11MC7-P02MPH0-6570 has a maximum operating temperature of 120°C, compared to 150°C for the PAB.M0.2GL.AC65G. Applications operating above 120°C require the LEMO part.

Q: Do both connectors support the same cable opening range?

A: Yes. Both parts accept cables with outer diameters between 0.209" and 0.256" (5.30mm to 6.50mm), ensuring identical cable compatibility.

Q: Are both parts compliant with regulatory requirements?

A: Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory standards for industrial, medical, and automotive applications.

Q: What is the difference in contact material?

A: The PAB.M0.2GL.AC65G does not specify contact material in the provided data. The S11MC7-P02MPH0-6570 uses brass contacts with gold mating finish. Both maintain gold contact finish for mating surfaces.