PAA.M1.0GL.AC65V Equivalent & Substitute Parts

Part Overview

The PAA.M1.0GL.AC65V is a 10-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 890 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component interchange.

Substiute Parts

PAA.M1.0GL.AC65V

LEMOIn Stock: 958PAA.M1.0GL.AC65V Datasheet

Current PartRFQ

S11MA7-P10MCC0-6550

ODUIn Stock: 822S11MA7-P10MCC0-6550 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PAA.M1.0GL.AC65V is determined by strict alignment of the following critical parameters:

• Connector Type & Gender: Plug with male pins (fixed requirement)
• Position Count: 10 positions (fixed requirement)
• Termination Method: Solder cup (fixed requirement)
• Shell Material: Polysulfone (PSU) (fixed requirement)
• Contact Finish: Gold plating on mating surfaces (fixed requirement)
• Fastening Mechanism: Push-pull connection system (fixed requirement)
• Ingress Protection: IP50 dust protection rating (fixed requirement)
• Cable Opening Range: 0.209" ~ 0.256" (5.30mm ~ 6.50mm) (fixed requirement)
• Compliance: ROHS3 compliant, REACH unaffected (fixed requirement)

The substitute part S11MA7-P10MCC0-6550 (ODU MEDI-SNAP®) meets all critical substitution criteria. Variations in current rating (2.75A vs. 3A) and maximum operating temperature (-50°C ~ 120°C vs. -50°C ~ 150°C) represent acceptable deviations within the scope of component interchange for applications not requiring the extended thermal range or maximum current capacity of the primary part.

Parameter Comparison

Engineering Selection Recommendations

Both the PAA.M1.0GL.AC65V and S11MA7-P10MCC0-6550 are active production parts with ROHS3 compliance and REACH unaffected status, making them suitable for regulated applications in industrial, medical, and automotive sectors.

Selection between these parts should be based on application-specific requirements:

• PAA.M1.0GL.AC65V is the primary choice when maximum current capacity (3A) or extended operating temperature range (-50°C ~ 150°C) is required.
• S11MA7-P10MCC0-6550 is a valid substitute when application current requirements do not exceed 2.75A and operating temperatures remain within the -50°C ~ 120°C range.

Both connectors provide equivalent mechanical and electrical performance within their respective rated parameters and maintain identical physical interface characteristics for mating and cable integration.

Frequently Asked Questions (FAQ)

Q: Can S11MA7-P10MCC0-6550 be used as a direct replacement for PAA.M1.0GL.AC65V?

A: Yes, provided the application does not require current levels exceeding 2.75A or operating temperatures above 120°C. All mechanical interfaces, pin configurations, and termination methods are identical.

Q: What is the difference in fastening mechanisms between these connectors?

A: The PAA.M1.0GL.AC65V includes a detent lock feature in addition to push-pull fastening, while the S11MA7-P10MCC0-6550 uses push-pull fastening. Both provide secure connection; the detent lock offers additional mechanical retention.

Q: Are both parts compatible with the same mating receptacles?

A: Both connectors use identical shell sizes (M10), pin counts (10), and push-pull fastening systems. Mating receptacles designed for one connector will physically interface with the other.

Q: What packaging options are available?

A: PAA.M1.0GL.AC65V is available in standard packaging. S11MA7-P10MCC0-6550 is supplied in bulk packaging.

Q: Are there any compliance differences between these parts?

A: Both parts are ROHS3 compliant and REACH unaffected. No compliance restrictions apply to either connector for regulated applications.

Q: What is the contact material composition?

A: PAA.M1.0GL.AC65V contact material is not specified in the product data. S11MA7-P10MCC0-6550 uses brass contacts with gold plating. Both provide equivalent gold-plated mating surfaces.