PAA.M1.0GL.AC65N Equivalent & Substitute Parts

Part Overview

The PAA.M1.0GL.AC65N is a 10-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 1103 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component interchange.

Substiute Parts

PAA.M1.0GL.AC65N

LEMOIn Stock: 1117PAA.M1.0GL.AC65N Datasheet

Current PartRFQ

S11MA7-P10MCC0-6580

ODUIn Stock: 1008S11MA7-P10MCC0-6580 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PAA.M1.0GL.AC65N is determined by the following critical parameters:

• Connector Configuration: Plug with male pins, 10-position circular connector
• Termination Method: Solder cup termination for direct wire attachment
• Shell Material & Finish: Polysulfone (PSU) construction with gold-plated mating contacts
• Mechanical Interface: Push-pull fastening with M10 shell size and free-hanging mounting
• Environmental Protection: IP50 ingress protection rating
• Electrical Performance: Current and voltage ratings sufficient for the application
• Operating Temperature: Compatibility within specified thermal range
• Compliance: RoHS3 compliance and MSL rating

The substitute part S11MA7-P10MCC0-6580 (ODU MEDI-SNAP®) meets the core substitution criteria across connector type, position count, termination method, shell material, contact finish, mounting configuration, and ingress protection. Variations in current rating, maximum operating temperature, and fastening mechanism details are documented in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

Both the PAA.M1.0GL.AC65N and S11MA7-P10MCC0-6580 are active production parts with ROHS3 compliance and unlimited moisture sensitivity ratings, making them suitable for long-term supply chain planning. The primary differences between these parts are:

• Current Rating: The LEMO part supports 3A versus 2.75A for the ODU part. Applications requiring the full 3A rating must use the PAA.M1.0GL.AC65N.
• Operating Temperature Maximum: The LEMO part operates to 150°C versus 120°C for the ODU part. Applications requiring operation above 120°C must use the PAA.M1.0GL.AC65N.
• Fastening Mechanism: The LEMO part includes detent lock in addition to push-pull fastening, while the ODU part provides push-pull fastening only.

Selection between these parts depends on whether the application requirements fall within the ODU part's electrical and thermal specifications. Both parts maintain identical mechanical interfaces, shell materials, contact finishes, and ingress protection ratings.

Frequently Asked Questions (FAQ)

Q: Can the S11MA7-P10MCC0-6580 be used as a direct replacement for the PAA.M1.0GL.AC65N?

A: Direct replacement is possible only if the application does not require the full 3A current rating and does not operate above 120°C. The ODU part is rated for 2.75A maximum current and 120°C maximum temperature. If either specification is exceeded in the application, the LEMO part must be used.

Q: Are the mechanical interfaces identical between these two parts?

A: Both parts share identical mounting type (free-hanging in-line), cable opening dimensions (0.209" ~ 0.256"), shell material (Polysulfone PSU), contact finish (gold), and ingress protection rating (IP50). The primary mechanical difference is the fastening mechanism: LEMO includes detent lock with push-pull, while ODU provides push-pull only.

Q: What is the significance of the shell size designation difference (M10 versus 1)?

A: The shell size designations reflect different manufacturer nomenclature systems. Both parts are 10-position circular connectors with compatible mechanical interfaces for the specified applications.

Q: Are both parts suitable for medical applications?

A: Both parts list medical applications in their application scope and maintain ROHS3 compliance with MSL rating 1. Application suitability depends on specific medical device requirements and regulatory pathway considerations beyond the component specifications provided.

Q: What is the difference in contact material between these parts?

A: The LEMO part does not specify contact material in the provided data. The ODU part specifies brass contact material. Both maintain gold plating on the mating surface.