PAA.M1.0GL.AC65J Equivalent & Substitute Parts

Part Overview

The PAA.M1.0GL.AC65J is a 10-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 918 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component interchange based on electrical and mechanical compatibility.

Substiute Parts

PAA.M1.0GL.AC65J

LEMOIn Stock: 1008PAA.M1.0GL.AC65J Datasheet

Current PartRFQ

S11MA7-P10MCC0-6540

ODUIn Stock: 822S11MA7-P10MCC0-6540 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PAA.M1.0GL.AC65J is determined by the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Plug, Male Pins
• Number of Positions: 10
• Termination: Solder Cup
• Shell Material: Polysulfone (PSU)
• Contact Finish - Mating: Gold
• Cable Opening: 0.209" ~ 0.256" (5.30mm ~ 6.50mm)
• Ingress Protection: IP50 - Dust Protected
• Shielding: Unshielded
• Mounting Type: Free Hanging (In-Line)
• Orientation: A

Allowable Variation Parameters:

• Current Rating: Substitute must meet or exceed 3A
• Operating Temperature: Substitute must cover the range -50°C to 150°C or a subset thereof
• Fastening Type: Push-Pull variants acceptable
• Insert Material: PEEK or equivalent dielectric materials
• Backshell Material: Polysulfone (PSU) or equivalent

The substitute part S11MA7-P10MCC0-6540 from ODU meets the mandatory matching criteria and is therefore qualified as an equivalent component for this application category.

Parameter Comparison

Engineering Selection Recommendations

Both the PAA.M1.0GL.AC65J and S11MA7-P10MCC0-6540 are active production components with ROHS3 compliance and REACH unaffected status, making them suitable for regulated applications in automotive, industrial, and medical sectors.

The primary distinction between these parts lies in current rating and maximum operating temperature. The PAA.M1.0GL.AC65J supports 3A continuous current and operates to 150°C, while the S11MA7-P10MCC0-6540 is rated for 2.75A and operates to 120°C. Component selection should be based on the specific current and thermal requirements of the target application. If the application requires operation above 120°C or sustained currents approaching 3A, the PAA.M1.0GL.AC65J is the appropriate choice. For applications operating within the 2.75A and -50°C to 120°C envelope, the S11MA7-P10MCC0-6540 provides equivalent mechanical and electrical interface compatibility.

Both connectors feature identical cable opening dimensions, shell materials, contact finishes, and ingress protection ratings, ensuring mechanical interchangeability in mating interface design.

Frequently Asked Questions (FAQ)

Q: Can the S11MA7-P10MCC0-6540 be used as a direct replacement for the PAA.M1.0GL.AC65J?

A: The S11MA7-P10MCC0-6540 is mechanically and electrically compatible for applications that do not exceed 2.75A continuous current or require operation above 120°C. If your application operates within these parameters, substitution is permissible. If your design requires the full 3A rating or 150°C operating capability, the PAA.M1.0GL.AC65J must be used.

Q: Are the shell size designations M10 and 1 equivalent?

A: Yes. The M10 designation (LEMO) and the 1 designation (ODU MEDI-SNAP®) refer to equivalent shell sizes within their respective manufacturer series. Both connectors accommodate 10 positions with identical mating interface dimensions.

Q: What are the key compatibility criteria for these connectors?

A: Compatibility is ensured by matching connector type (plug, male pins), position count (10), termination method (solder cup), shell material (PSU), contact finish (gold), cable opening range (5.30mm to 6.50mm), and ingress protection level (IP50). Both parts meet these criteria.

Q: Are there any compliance differences between these parts?

A: Both parts are ROHS3 compliant and REACH unaffected. No compliance barriers exist for substitution in regulated applications.

Q: What is the significance of the different current ratings?

A: The current rating indicates the maximum continuous current the connector contacts can safely carry without exceeding temperature rise limits. The PAA.M1.0GL.AC65J supports 3A, while the S11MA7-P10MCC0-6540 supports 2.75A. Selection depends on your circuit's actual current requirements.

Q: Why does the operating temperature range differ?

A: The PAA.M1.0GL.AC65J is rated to 150°C, while the S11MA7-P10MCC0-6540 is rated to 120°C. This reflects differences in material formulation and design margins. Applications requiring sustained operation above 120°C must use the PAA.M1.0GL.AC65J.