PAA.M0.9GL.AC65A Equivalent & Substitute Parts

Part Overview

The PAA.M0.9GL.AC65A is a 9-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 839 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to availability constraints, supply chain considerations, or application-specific requirements.

Substiute Parts

PAA.M0.9GL.AC65A

LEMOIn Stock: 903PAA.M0.9GL.AC65A Datasheet

Current PartRFQ

S11MA7-P09MCC0-6560

ODUIn Stock: 1055S11MA7-P09MCC0-6560 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PAA.M0.9GL.AC65A is determined by the following critical parameters:

• Connector Configuration: 9-position plug with male pins and solder cup termination
• Shell Material & Size: Polysulfone (PSU) construction with M09 insert size
• Contact System: Gold-plated mating surface for corrosion resistance
• Ingress Protection: IP50 dust protection rating
• Mechanical Interface: Push-pull fastening with detent lock and free-hanging mounting
• Electrical Performance: Current rating and operating temperature range
• Compliance: ROHS3 compliance and REACH unaffected status

The substitute part S11MA7-P09MCC0-6560 (ODU MEDI-SNAP®) meets these core substitution criteria with compatible electrical and mechanical specifications across all critical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the PAA.M0.9GL.AC65A and S11MA7-P09MCC0-6560 are active production parts with ROHS3 compliance and REACH unaffected status, meeting regulatory requirements for industrial, medical, and automotive applications.

The PAA.M0.9GL.AC65A provides a current rating of 3A with an operating temperature range of -50°C to 150°C. The S11MA7-P09MCC0-6560 operates at 2.75A with a maximum temperature of 120°C. Selection between these parts should be based on application-specific current and temperature requirements. Both connectors maintain equivalent mechanical interfaces, shell materials, contact finishes, and ingress protection ratings, ensuring physical and electrical compatibility in standard circular connector applications.

Frequently Asked Questions (FAQ)

Q: Can the S11MA7-P09MCC0-6560 be used as a direct replacement for the PAA.M0.9GL.AC65A?

A: The S11MA7-P09MCC0-6560 is compatible as a substitute when application current requirements do not exceed 2.75A and operating temperatures remain below 120°C. Both connectors share identical mechanical interfaces, shell materials, contact finishes, and ingress protection specifications.

Q: What are the key differences between these two 9-position connectors?

A: The primary differences are current rating (3A vs. 2.75A) and maximum operating temperature (150°C vs. 120°C). The PAA.M0.9GL.AC65A offers higher thermal and current capacity. All other electrical and mechanical parameters are equivalent.

Q: Are both parts compliant with industry standards?

A: Both the PAA.M0.9GL.AC65A and S11MA7-P09MCC0-6560 are ROHS3 compliant and REACH unaffected, meeting regulatory requirements for industrial and medical applications.

Q: What is the cable opening specification for these connectors?

A: Both connectors accept cable diameters between 0.209" and 0.256" (5.30mm to 6.50mm), providing equivalent cable accommodation.

Q: Do these connectors support the same fastening mechanism?

A: Both connectors use push-pull fastening. The PAA.M0.9GL.AC65A includes detent lock functionality, while the S11MA7-P09MCC0-6560 uses standard push-pull fastening. Both mechanisms are compatible with free-hanging, in-line mounting applications.