PAA.M0.2GL.AC65N Equivalent & Substitute Parts

Part Overview

The PAA.M0.2GL.AC65N is a 2-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring push-pull detent lock fastening in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 896 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component interchange.

Substiute Parts

PAA.M0.2GL.AC65N

LEMOIn Stock: 929PAA.M0.2GL.AC65N Datasheet

Current PartRFQ

S11MA7-P02MPH0-6580

ODUIn Stock: 893S11MA7-P02MPH0-6580 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part S11MA7-P02MPH0-6580 (ODU MEDI-SNAP®) qualifies as an equivalent based on the following critical parameters:

• Connector Configuration: Both parts are 2-position circular connector plugs with male pins and solder cup termination
• Fastening Mechanism: Both utilize push-pull fastening with detent lock functionality
• Shell Material: Both employ Polysulfone (PSU) construction
• Contact Finish: Both feature gold-plated mating surfaces
• Ingress Protection: Both meet IP50 dust protection rating
• Cable Opening Compatibility: Both accommodate 0.209" ~ 0.256" (5.30mm ~ 6.50mm) cable diameters
• Regulatory Compliance: Both are ROHS3 compliant and REACH unaffected
• Mounting Style: Both are free-hanging in-line configurations with backshell features

Substitution is valid within the constraints of the differing electrical and thermal specifications noted in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

Both parts maintain active production status and full ROHS3 compliance with REACH unaffected designation. Selection between PAA.M0.2GL.AC65N and S11MA7-P02MPH0-6580 depends on application-specific requirements:

• Thermal Environment: Applications operating above 120°C require the LEMO PAA.M0.2GL.AC65N due to its 150°C upper operating limit
• Current Capacity: Applications requiring current handling above 10A benefit from the ODU S11MA7-P02MPH0-6580 rated at 14A
• Fastening Specification: The LEMO part explicitly specifies detent lock functionality; the ODU part specifies push-pull fastening without explicit detent lock notation
• Regulatory Certifications: Both parts satisfy identical compliance requirements (ROHS3, REACH, EAR99, HTSUS 8536.69.4020)

Frequently Asked Questions (FAQ)

Q: Can S11MA7-P02MPH0-6580 directly replace PAA.M0.2GL.AC65N in all applications?

A: Direct substitution is valid for applications where operating temperature does not exceed 120°C and current requirements do not exceed 10A. Applications exceeding these parameters require the original LEMO specification.

Q: What is the significance of the fastening type difference?

A: The LEMO part specifies "Push-Pull, Detent Lock" while the ODU part specifies "Push-Pull." The detent lock feature provides positive engagement confirmation. Verify application requirements for detent lock functionality before substitution.

Q: Are both parts compatible with identical cable opening specifications?

A: Yes. Both parts accommodate cable diameters of 0.209" ~ 0.256" (5.30mm ~ 6.50mm), ensuring mechanical compatibility in backshell and strain relief applications.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, classified under ECCN EAR99, and share identical HTSUS code 8536.69.4020.

Q: What is the inventory status for each part?

A: PAA.M0.2GL.AC65N has 896 units in stock (LEMO). S11MA7-P02MPH0-6580 has 873 units in stock (ODU). Both are available as new original components.

Q: Are there application differences between LEMO and ODU parts?

A: LEMO lists applications as Automotive, Industrial, Medical, and Testing Equipment & Measurement. ODU lists Industrial, Medical, Military, and Testing Equipment & Measurement. Both support medical and industrial applications; ODU explicitly includes military applications.