PAA.M0.2GL.AC65G Equivalent & Substitute Parts

Part Overview

The PAA.M0.2GL.AC65G is a 2-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable push-pull detent lock fastening in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 938 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to availability, lead time, or application-specific constraints.

Substiute Parts

PAA.M0.2GL.AC65G

LEMOIn Stock: 1045PAA.M0.2GL.AC65G Datasheet

Current PartRFQ

S11MA7-P02MPH0-6570

ODUIn Stock: 789S11MA7-P02MPH0-6570 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part S11MA7-P02MPH0-6570 (ODU MEDI-SNAP®) is identified as equivalent based on the following matching parameters:

• Connector type: Plug with male pins
• Number of positions: 2
• Termination method: Solder cup
• Shell material: Polysulfone (PSU)
• Contact finish: Gold
• Fastening mechanism: Push-pull
• Mounting configuration: Free hanging (in-line)
• Cable opening range: 0.209" ~ 0.256" (5.30mm ~ 6.50mm)
• Ingress protection rating: IP50 - Dust protected
• Insert material: Polyetheretherketone (PEEK)
• Backshell material: Polysulfone (PSU)
• RoHS compliance: ROHS3 compliant
• Moisture sensitivity level: 1 (Unlimited)

Substitution is valid when these core parameters align with application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the PAA.M0.2GL.AC65G and S11MA7-P02MPH0-6570 are active production parts with ROHS3 compliance and unlimited moisture sensitivity rating. Selection between these parts should be based on the following provided specifications:

The PAA.M0.2GL.AC65G supports an operating temperature range of -50°C to 150°C, while the S11MA7-P02MPH0-6570 operates from -50°C to 120°C. Applications requiring operation above 120°C necessitate the LEMO part.

The S11MA7-P02MPH0-6570 provides a higher current rating of 14A compared to the 10A rating of the PAA.M0.2GL.AC65G. Applications requiring current capacity above 10A require the ODU substitute.

Both connectors maintain identical cable opening specifications, shell materials, contact finishes, and ingress protection ratings. Both are certified under identical export control and tariff classifications.

Frequently Asked Questions (FAQ)

Q: Can S11MA7-P02MPH0-6570 replace PAA.M0.2GL.AC65G in all applications?

A: Substitution is valid when the application operates within the ODU part's temperature range (-50°C to 120°C) and current requirements do not exceed 14A. If the application requires operation above 120°C, the LEMO part is required.

Q: What are the key differences between these two connectors?

A: The primary differences are the maximum operating temperature (LEMO: 150°C vs. ODU: 120°C) and current rating (LEMO: 10A vs. ODU: 14A). All other electrical and mechanical parameters are equivalent.

Q: Are both parts available in the same packaging?

A: The PAA.M0.2GL.AC65G is available in standard packaging with 938 units in stock. The S11MA7-P02MPH0-6570 is available in bulk packaging with 734 units in stock.

Q: Do both connectors meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, classified as EAR99 for export control, and share the same HTSUS tariff code 8536.69.4020.

Q: What is the shell size difference between M02 and 1?

A: The shell size designations differ between manufacturers. Both connectors maintain identical cable opening specifications of 0.209" to 0.256" (5.30mm to 6.50mm), ensuring mechanical compatibility in applications designed for either part.