PAA.M0.2GL.AC65A Equivalent & Substitute Parts

Part Overview

The PAA.M0.2GL.AC65A is a 2-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring push-pull detent lock fastening in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 855 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, application-specific requirements, or design standardization across product lines.

Substiute Parts

PAA.M0.2GL.AC65A

LEMOIn Stock: 879PAA.M0.2GL.AC65A Datasheet

Current PartRFQ

S11MA7-P02MPH0-6560

ODUIn Stock: 889S11MA7-P02MPH0-6560 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part S11MA7-P02MPH0-6560 (ODU MEDI-SNAP®) is classified as a direct equivalent based on the following alignment criteria:

Matching Parameters:

• Connector type: Plug, Male Pins
• Number of positions: 2
• Termination method: Solder Cup
• Shell material: Polysulfone (PSU)
• Contact finish: Gold
• Cable opening range: 0.209" ~ 0.256" (5.30mm ~ 6.50mm)
• Ingress protection: IP50 - Dust Protected
• Mounting type: Free Hanging (In-Line)
• Orientation: A
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Fastening Type Consideration: Both parts feature push-pull fastening with detent lock mechanisms, ensuring mechanical compatibility in applications requiring secure connection and disconnection cycles.

Parameter Comparison

Engineering Selection Recommendations

Both PAA.M0.2GL.AC65A and S11MA7-P02MPH0-6560 are active production parts with ROHS3 compliance and REACH unaffected status, meeting regulatory requirements for industrial, medical, and automotive applications. The ODU substitute provides a higher current rating of 14A compared to the LEMO part's 10A rating, making it suitable for applications requiring increased current capacity. The LEMO part maintains a higher maximum operating temperature of 150°C versus the ODU part's 120°C limit. Selection between these parts should be based on specific application requirements regarding current capacity and thermal operating range.

Frequently Asked Questions (FAQ)

Q: Can S11MA7-P02MPH0-6560 replace PAA.M0.2GL.AC65A in all applications?

A: Both parts share identical mechanical interfaces, shell materials, contact finishes, and ingress protection ratings. The ODU substitute is suitable for applications operating within -50°C to 120°C and requiring up to 14A current capacity. Applications requiring operation above 120°C or with current demands below 10A should reference the specific thermal and electrical requirements of the target application.

Q: What are the key compatibility factors between these two connector models?

A: Compatibility is ensured through matching connector type (plug, male pins), position count (2), termination method (solder cup), shell material (polysulfone), contact finish (gold), cable opening dimensions (0.209" ~ 0.256"), and fastening mechanism (push-pull with detent lock). Both parts feature identical insert material (PEEK) and backshell material composition.

Q: Are there packaging differences between the main part and substitute?

A: The LEMO part is supplied in standard packaging, while the ODU substitute is supplied in bulk packaging. Both maintain identical moisture sensitivity level (MSL 1 - Unlimited) and storage requirements.

Q: What compliance certifications apply to both parts?

A: Both PAA.M0.2GL.AC65A and S11MA7-P02MPH0-6560 are ROHS3 compliant and REACH unaffected, meeting regulatory requirements for use in industrial, medical, automotive, and testing equipment applications.