P89V660FBC,557 Equivalent & Substitute Parts

Part Overview

The P89V660FBC,557 is an 8051-based 8-bit microcontroller manufactured by NXP USA Inc., featuring 16KB FLASH memory, 512 bytes of RAM, and operating at 40MHz. This device is classified as obsolete, necessitating identification of active alternative components for new designs and production continuity. The part is housed in a 44-TQFP package and operates across the industrial temperature range of -40°C to 85°C.

Key Parameters

Parameter	Value
Core Processor	8051
Core Size	8-Bit
Program Memory Type	FLASH
Program Memory Size	16KB (16K x 8)
RAM Size	512 x 8
Operating Speed	40MHz
Voltage Supply Range	4.5V ~ 5.5V
Package Type	44-TQFP (10x10)
Operating Temperature	-40°C ~ 85°C
Connectivity	I2C, SPI, UART/USART
Peripherals	POR, PWM, WDT
Number of I/O	36
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the P89V660FBC,557 is determined by the following critical parameters:

Core Architecture: 8051-compatible processor required for firmware compatibility
Memory Configuration: Program FLASH memory and RAM capacity must meet or exceed the original specification
Package Compatibility: 44-pin TQFP or LQFP package with identical or compatible pinout
Voltage Supply Range: Operating voltage window must encompass or be compatible with the original 4.5V ~ 5.5V range
Operating Temperature: Industrial temperature range (-40°C ~ 85°C) must be maintained
Connectivity Interfaces: I2C, SPI, and UART/USART support required
Compliance Standards: RoHS3 compliance and REACH status alignment

The AT89LP51IC2-20AAU qualifies as a substitute based on these parameters, offering enhanced specifications while maintaining core 8051 compatibility and package form factor.

Parameter Comparison

Parameter	P89V660FBC,557	AT89LP51IC2-20AAU
Manufacturer	NXP USA Inc.	Microchip Technology
Core Processor	8051	8051
Core Size	8-Bit	8-Bit
Program Memory Size	16KB (16K x 8)	32KB (32K x 8)
RAM Size	512 x 8	1.375K x 8
Operating Speed	40MHz	20MHz
Voltage Supply Range	4.5V ~ 5.5V	2.4V ~ 5.5V
Package Type	44-TQFP (10x10)	44-LQFP (10x10)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C
Connectivity	I2C, SPI, UART/USART	EBI/EMI, I2C, SPI, UART/USART
Peripherals	POR, PWM, WDT	Brown-out Detect/Reset, POR, PWM, WDT
Number of I/O	36	40
Product Status	Obsolete	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	3 (168 Hours)	3 (168 Hours)

Engineering Selection Recommendations

The AT89LP51IC2-20AAU is an active product from Microchip Technology and represents a viable substitute for the obsolete P89V660FBC,557. Both devices maintain ROHS3 compliance and identical MSL ratings, ensuring compatibility with current manufacturing and environmental standards.

The substitute offers expanded program memory (32KB versus 16KB) and increased RAM capacity (1.375K x 8 versus 512 x 8), providing enhanced functionality for applications requiring additional code or data storage. The extended voltage supply range (2.4V ~ 5.5V) provides greater operational flexibility compared to the original specification.

The package transition from 44-TQFP to 44-LQFP maintains the same pin count and 10x10mm footprint, though PCB layout verification is necessary to confirm mechanical and electrical compatibility with existing designs. The reduction in operating speed from 40MHz to 20MHz must be evaluated against application timing requirements.

Frequently Asked Questions (FAQ)

Q: Can the AT89LP51IC2-20AAU directly replace the P89V660FBC,557 without PCB modifications?

A: Both devices use 44-pin packages with identical footprint dimensions (10x10mm). However, the package type differs (TQFP versus LQFP), requiring verification of pinout compatibility and PCB pad specifications. Consult device datasheets for detailed pin assignments and electrical characteristics.

Q: What is the impact of the 20MHz operating speed on the AT89LP51IC2-20AAU compared to the 40MHz P89V660FBC,557?

A: The reduced clock speed affects instruction execution timing. Applications dependent on specific timing margins or high-frequency operations must be re-evaluated. The AT89LP51IC2-20AAU can be configured with external oscillators if higher speeds are required within device specifications.

Q: Are the connectivity interfaces identical between these two devices?

A: Both devices support I2C, SPI, and UART/USART interfaces. The AT89LP51IC2-20AAU includes additional EBI/EMI connectivity not present in the P89V660FBC,557. Existing firmware utilizing the common interfaces requires no modification.

Q: What are the memory implications of substitution?

A: The AT89LP51IC2-20AAU provides double the program FLASH memory (32KB versus 16KB) and increased RAM (1.375K x 8 versus 512 x 8). Existing firmware compiled for 16KB FLASH will operate within the larger memory space without modification. Applications can leverage the additional memory for expanded functionality.

Q: Is the extended voltage supply range of the AT89LP51IC2-20AAU compatible with 5V-only designs?

A: Yes. The AT89LP51IC2-20AAU operates across 2.4V ~ 5.5V, encompassing the original 4.5V ~ 5.5V range. Designs operating at 5V are fully compatible. The lower minimum voltage (2.4V) enables operation in lower-voltage applications if required.

Q: What compliance certifications apply to both devices?

A: Both the P89V660FBC,557 and AT89LP51IC2-20AAU are ROHS3 compliant and REACH unaffected. MSL ratings are identical at Level 3 (168 hours), ensuring equivalent moisture sensitivity handling during manufacturing and storage.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message