P6SMBJ51 Equivalent & Substitute Parts

Part Overview

The P6SMBJ51 is a unidirectional transient voltage suppressor (TVS) diode manufactured by Littelfuse, housed in a DO-214AA (SMB) surface mount package. This component is rated for 51V protection with 600W peak pulse power and 8.7A peak pulse current, designed for general-purpose transient voltage suppression applications. The part is currently listed as obsolete, making equivalent substitutes necessary for ongoing design support and procurement.

Key Parameters

Parameter	Value
Manufacturer Part Number	P6SMBJ51
Manufacturer	Littelfuse
Category	Transient Voltage Suppressors (TVS)
Type	Zener
Unidirectional Channels	1
Voltage - Reverse Standoff (Typ)	43.6V
Voltage - Breakdown (Min)	45.95V
Voltage - Clamping (Max) @ Ipp	73.61V
Current - Peak Pulse (10/1000µs)	8.7A
Power - Peak Pulse	600W
Operating Temperature	-55°C ~ 150°C (TJ)
Package / Case	DO-214AA, SMB
Product Status	Obsolete
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution for the P6SMBJ51 is determined by the following critical parameters:

Reverse Standoff Voltage (Typ): 43.6V — all substitutes must maintain this specification
Unidirectional Configuration: Single channel zener diode topology
Peak Pulse Current: 8.7A nominal (8.6A acceptable within tolerance)
Peak Pulse Power: 600W
Package Type: DO-214AA (SMB) surface mount
Mounting Type: Surface mount

All qualified substitutes maintain the 43.6V standoff voltage and 600W power rating. Clamping voltage variations (70.1V vs. 73.61V) and minor current deviations (8.6A vs. 8.7A) fall within acceptable engineering tolerances for TVS diode applications. All substitutes are active products with current manufacturing status and full RoHS compliance.

Parameter Comparison

Parameter	P6SMBJ51 (Main)	P6SMB51A (Eaton)	SZP6SMB51AT3G (Littelfuse)	SMBJP6KE51A-TP (MCC)
Manufacturer	Littelfuse	Eaton - Electronics Division	Littelfuse Inc.	Micro Commercial Co
Product Status	Obsolete	Active	Active	Active
Type	Zener	Zener	Zener	Zener
Unidirectional Channels	1	1	1	1
Voltage - Reverse Standoff (Typ)	43.6V	43.6V	43.6V	43.6V
Voltage - Breakdown (Min)	45.95V	48.5V	48.5V	48.5V
Voltage - Clamping (Max) @ Ipp	73.61V	70.1V	70.1V	70.1V
Current - Peak Pulse (10/1000µs)	8.7A	8.7A	8.6A	8.7A
Power - Peak Pulse	600W	600W	600W	600W
Operating Temperature	-55°C ~ 150°C	-55°C ~ 150°C	-65°C ~ 150°C	-55°C ~ 175°C
Package / Case	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB
RoHS Status	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

P6SMB51A (Eaton - Electronics Division) — Active product with full RoHS compliance. Identical standoff voltage, peak pulse current, and power rating. Clamping voltage of 70.1V is lower than the original 73.61V, providing improved transient suppression performance. Suitable for direct replacement in telecom and general-purpose applications.

SZP6SMB51AT3G (Littelfuse Inc.) — Active product with ROHS3 compliance and AEC-Q101 automotive qualification. Extended operating temperature range (-65°C to 150°C) provides additional thermal margin. Peak pulse current of 8.6A is within acceptable tolerance. Recommended for automotive-grade applications or environments requiring enhanced temperature performance.

SMBJP6KE51A-TP (Micro Commercial Co) — Active product with ROHS3 compliance. Extended operating temperature range (-55°C to 175°C) supports high-temperature applications. Identical standoff voltage and peak pulse current. Clamping voltage of 70.1V matches other active substitutes.

All three substitutes maintain the critical 43.6V reverse standoff voltage and 600W power rating required for circuit protection equivalence. Selection should be based on application-specific requirements including temperature range, automotive qualification needs, and supplier availability.

Frequently Asked Questions (FAQ)

Q: Can P6SMB51A replace P6SMBJ51 directly? A: Yes. Both parts share identical reverse standoff voltage (43.6V), peak pulse current (8.7A), and power rating (600W). The lower clamping voltage (70.1V vs. 73.61V) provides equivalent or improved protection. Package and mounting type are identical.

Q: What is the difference between the clamping voltages? A: The original P6SMBJ51 clamps at 73.61V maximum, while active substitutes clamp at 70.1V. Lower clamping voltage indicates faster transient suppression with reduced overshoot, which is beneficial for circuit protection.

Q: Is SZP6SMB51AT3G suitable for automotive applications? A: Yes. SZP6SMB51AT3G carries AEC-Q101 automotive qualification and extended temperature range (-65°C to 150°C), making it appropriate for automotive-grade designs.

Q: Are all substitutes RoHS compliant? A: Yes. P6SMB51A is RoHS compliant, while SZP6SMB51AT3G and SMBJP6KE51A-TP are ROHS3 compliant. All meet environmental compliance requirements.

Q: Can I use SMBJP6KE51A-TP in high-temperature environments? A: Yes. SMBJP6KE51A-TP supports operating temperatures up to 175°C (junction), exceeding the original part's 150°C limit and providing additional thermal headroom for high-temperature applications.

Q: Do all substitutes use the same DO-214AA (SMB) package? A: Yes. All substitutes use identical DO-214AA (SMB) surface mount packaging, ensuring PCB layout and footprint compatibility without design modifications.

Q: What is the moisture sensitivity level for these parts? A: All parts, including the original and substitutes, have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message