P6SMB20 Equivalent & Substitute Parts

Part Overview

The P6SMB20 is a transient voltage suppressor (TVS) diode manufactured by Littelfuse Inc., designed for general-purpose overvoltage protection in surface-mount applications. This unidirectional Zener diode operates with a reverse standoff voltage of 17.1V and provides clamping at 29.09V maximum. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for new designs and production continuity.

Key Parameters

Parameter	Value
Reverse Standoff Voltage (Typ)	17.1V
Breakdown Voltage (Min)	18V
Clamping Voltage (Max) @ Ipp	29.09V
Peak Pulse Current (10/1000µs)	22A
Peak Pulse Power	600W
Operating Temperature Range	-55°C to 150°C (TJ)
Package Type	DO-214AA (SMB)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the P6SMB20 is determined by the following critical parameters:

Reverse Standoff Voltage: Must be 17.1V (typical)
Breakdown Voltage (Min): Must be 18V or higher
Clamping Voltage (Max) @ Ipp: Must not exceed 29.09V to ensure protection threshold compatibility
Peak Pulse Current: Must support minimum 22A
Peak Pulse Power: Must support 600W
Package/Case: Must be DO-214AA or SMB equivalent
Mounting Type: Must be Surface Mount
Operating Temperature Range: Must cover -55°C to 150°C minimum

Substitute parts are grouped into two categories: direct manufacturer equivalents (same electrical performance) and manufacturer-recommended alternatives (active production status with comparable electrical characteristics).

Parameter Comparison

Parameter	P6SMB20 (Littelfuse)	P6SMB20A (Eaton)	SZP6SMB20AT3G (Littelfuse)	SMBJP6KE20A-TP (Micro Commercial)
Reverse Standoff Voltage (Typ)	17.1V	17.1V	17.1V	17.1V
Breakdown Voltage (Min)	18V	19V	19V	19V
Clamping Voltage (Max) @ Ipp	29.09V	27.7V	27.7V	27.7V
Peak Pulse Current (10/1000µs)	22A	21.7A	22A	22A
Peak Pulse Power	600W	600W	600W	600W
Operating Temperature Range	-55°C to 150°C	-55°C to 150°C	-65°C to 150°C	-55°C to 175°C
Package Type	DO-214AA (SMB)	DO-214AA (SMB)	DO-214AA (SMB)	DO-214AA (SMB)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Product Status	Obsolete	Active	Active	Active
RoHS Status	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

SZP6SMB20AT3G (Littelfuse Inc.) is the manufacturer-recommended primary substitute. This part maintains identical peak pulse current (22A) and clamping voltage (27.7V) performance, offers extended operating temperature range (-65°C to 150°C), and carries AEC-Q101 automotive qualification. Product status is active with high inventory availability (5400 pcs). Packaging is Tape & Reel (TR), suitable for automated assembly.

SMBJP6KE20A-TP (Micro Commercial Co) provides an alternative with equivalent electrical performance (22A peak pulse current, 27.7V clamping voltage) and extended upper operating temperature limit (-55°C to 175°C). This part is active production status with the highest inventory availability (30100 pcs) and is suitable for general-purpose applications.

P6SMB20A (Eaton - Electronics Division) is a direct manufacturer equivalent with active product status. Peak pulse current is slightly reduced to 21.7A, and clamping voltage is 27.7V. This part is specified for telecom applications and maintains full compatibility with the original package and mounting requirements.

All substitute parts meet the mandatory electrical parameters (17.1V standoff voltage, 600W peak power, DO-214AA package, surface-mount configuration) and maintain RoHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can P6SMB20A be used as a direct replacement for P6SMB20?

A: Yes. P6SMB20A maintains the same reverse standoff voltage (17.1V), package type (DO-214AA/SMB), and mounting configuration. The clamping voltage is 27.7V (lower than the original 29.09V), which provides improved protection margins. Peak pulse current is 21.7A versus the original 22A, a negligible difference for most applications.

Q: What is the difference between SZP6SMB20AT3G and SMBJP6KE20A-TP?

A: Both parts provide identical electrical performance (17.1V standoff, 27.7V clamping, 22A peak current, 600W power). SZP6SMB20AT3G includes AEC-Q101 automotive qualification and operates to -65°C minimum. SMBJP6KE20A-TP extends the upper temperature limit to 175°C and has higher inventory availability. Selection depends on application requirements and temperature operating range.

Q: Are all substitute parts in the same package?

A: Yes. All substitute parts use DO-214AA (SMB) surface-mount package, ensuring mechanical and footprint compatibility with the original P6SMB20 design.

Q: Why is the clamping voltage lower in substitute parts?

A: The substitute parts (27.7V clamping) provide tighter voltage regulation compared to the original P6SMB20 (29.09V clamping). This represents an improvement in transient suppression performance and is acceptable for circuit protection applications.

Q: Which substitute part should be selected for new designs?

A: For new designs, select based on application requirements: SZP6SMB20AT3G for automotive or extended low-temperature applications; SMBJP6KE20A-TP for general-purpose applications requiring extended high-temperature operation; P6SMB20A for telecom-specific applications. All three parts are active production status with adequate inventory.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message