P50L-080P-RR4-DA Equivalent & Substitute Parts

Part Overview

The P50L-080P-RR4-DA is an 80-position rectangular connector plug manufactured by 3M, featuring center strip contacts, through-hole mounting, and right-angle orientation. This connector is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system support and component procurement.

The P50L-080P-RR4-DA belongs to the Pak 50 and P50L series. Due to its obsolete status, sourcing alternatives that maintain electrical and mechanical compatibility is necessary for system maintenance and new production requirements.

Substiute Parts

P50L-080P-RR4-DA

3MIn Stock: 915P50L-080P-RR4-DA Datasheet

Current PartRFQ

TX25-80P-LT-H1E

JAE ElectronicsIn Stock: 1701TX25-80P-LT-H1E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the P50L-080P-RR4-DA is determined by strict equivalence across the following critical parameters:

• Number of Positions: 80 positions (non-negotiable for pin count compatibility)
• Pitch: 0.050" (1.27mm) (determines contact spacing and board layout compatibility)
• Number of Rows: 2 rows (defines physical arrangement and mating interface)
• Connector Type: Plug, Center Strip Contacts (ensures mechanical and electrical interface compatibility)
• Mounting Type: Through Hole, Right Angle (required for PCB assembly compatibility)
• Contact Finish: Gold (maintains electrical performance and corrosion resistance)
• Features: Board Lock (ensures mechanical retention during mating)
• Height Above Board: 0.354" (9.00mm) (critical for clearance and form factor)

The TX25-80P-LT-H1E from JAE Electronics meets all substitution criteria and is classified as an active product with current manufacturing support.

Parameter Comparison

Engineering Selection Recommendations

The TX25-80P-LT-H1E is a direct functional equivalent to the P50L-080P-RR4-DA. Both connectors share identical electrical and mechanical specifications across all critical parameters. The primary distinction is product lifecycle status: the P50L-080P-RR4-DA is obsolete, while the TX25-80P-LT-H1E is an active product with current manufacturing support.

The TX25-80P-LT-H1E carries ROHS3 compliance certification, meeting current environmental and regulatory requirements. Both parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity constraints during storage or handling.

Selection of the TX25-80P-LT-H1E is appropriate for new designs, production restocking, and system maintenance applications requiring long-term component availability.

Frequently Asked Questions (FAQ)

Q: Can the TX25-80P-LT-H1E be used as a direct replacement for the P50L-080P-RR4-DA?

A: Yes. Both connectors are electrically and mechanically equivalent across all specified parameters, including pin count, pitch, mounting type, contact finish, and board height. No design modifications are required.

Q: What is the primary reason for substitution?

A: The P50L-080P-RR4-DA is classified as obsolete. The TX25-80P-LT-H1E is an active product with current manufacturing support, ensuring long-term availability for procurement and system support.

Q: Are there packaging differences between these parts?

A: The P50L-080P-RR4-DA packaging is not specified in available documentation. The TX25-80P-LT-H1E is supplied in Tray packaging.

Q: Do both connectors meet current regulatory requirements?

A: The TX25-80P-LT-H1E is ROHS3 compliant. The P50L-080P-RR4-DA RoHS status is not specified. Both parts are MSL 1 (Unlimited) and carry identical ECCN and HTSUS classifications.

Q: Are there any electrical performance differences?

A: No. Both connectors feature gold contact finish with identical electrical specifications. The TX25-80P-LT-H1E specifies contact finish thickness of 4.00µin (0.100µm), while the P50L-080P-RR4-DA specifies flash thickness. Both finishes provide equivalent electrical performance for this connector class.