P25LE-068S-TGF Equivalent & Substitute Parts

Part Overview

The P25LE-068S-TGF is a 68-position rectangular socket connector manufactured by 3M, designed for IDC (Insulation Displacement Contact) termination with ribbon cable. This connector features gold-plated contacts, feed-through design, and strain relief for reliable signal transmission in ribbon cable applications. The part is currently obsolete, making identification of compatible substitute parts essential for ongoing system maintenance and component procurement.

Substiute Parts

P25LE-068S-TGF

3MIn Stock: 956P25LE-068S-TGF Datasheet

Current PartRFQ

P25LE-068S-DA

3MIn Stock: 1170P25LE-068S-DA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The P25LE-068S-DA qualifies as a direct substitute for the P25LE-068S-TGF based on the following critical parameters:

• Same manufacturer (3M) and series (P25LE)
• Identical connector configuration: 68-position socket with 0.050" pitch and 2-row layout
• Matching electrical specifications: IDC termination, 30 AWG ribbon cable, gold contact finish
• Identical mechanical interface: free hanging mounting, latch lock/eject fastening, feed-through design with strain relief
• Same contact type: outer shroud contact

The primary distinction is product status and compliance: P25LE-068S-TGF is obsolete, while P25LE-068S-DA is active production with RoHS compliance.

Parameter Comparison

Engineering Selection Recommendations

The P25LE-068S-DA is the appropriate substitute for the obsolete P25LE-068S-TGF. Both parts maintain identical electrical and mechanical specifications, ensuring direct compatibility in ribbon cable connector applications requiring 68-position IDC termination at 0.050" pitch.

The P25LE-068S-DA offers the additional advantage of active production status and RoHS compliance, supporting current regulatory requirements and supply chain continuity. The transition from the non-compliant P25LE-068S-TGF to the RoHS-compliant P25LE-068S-DA aligns with environmental and procurement standards without requiring design modifications.

Frequently Asked Questions (FAQ)

Q: Can P25LE-068S-DA directly replace P25LE-068S-TGF in existing assemblies?

A: Yes. Both connectors share identical pin counts (68), pitch spacing (0.050"), row configuration (2 rows), termination method (IDC), wire gauge (30 AWG), and mechanical mounting characteristics. No PCB or cable modifications are required.

Q: What is the significance of the product status difference?

A: P25LE-068S-TGF is obsolete and no longer manufactured by 3M. P25LE-068S-DA is in active production, ensuring reliable supply availability and ongoing manufacturer support.

Q: Does the RoHS compliance difference affect compatibility?

A: No. RoHS compliance indicates material composition standards and does not alter electrical or mechanical performance. The P25LE-068S-DA's RoHS compliance satisfies modern procurement and environmental regulations without affecting connector function.

Q: Are there packaging differences between these parts?

A: P25LE-068S-TGF packaging is not specified in available data. P25LE-068S-DA is supplied in bulk packaging. Confirm packaging requirements with your procurement department.

Q: What certifications apply to both parts?

A: Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4051) classifications, and both maintain MSL rating 1 (unlimited moisture sensitivity level).