P2353ABL60 Equivalent & Substitute Parts

Part Overview

The P2353ABL60 is a 200V off-state, 250A peak pulse TVS thyristor manufactured by Littelfuse Inc. in the SIDACtor® series. This three-element device is housed in a TO-220 Modified package and is designed for transient voltage suppression applications requiring high current handling capability. The part maintains active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when electrical parameters, mechanical packaging, and compliance certifications remain equivalent across the component family.

Substiute Parts

P2353ABL60

Littelfuse Inc.In Stock: 748P2353ABL60 Datasheet

Current PartRFQ

P2353ABL

Littelfuse Inc.In Stock: 2265P2353ABL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the P2353ABL60 is determined by equivalence across the following critical parameters:

• Voltage ratings: Breakover voltage (270V), off-state voltage (200V), and on-state voltage (8V)
• Current specifications: Peak pulse current at 8/20µs (250A) and 10/1000µs (80A), hold current (150mA)
• Physical configuration: Three-element design (3-SIP package), through-hole mounting
• Capacitance characteristics: 50pF and 75pF ratings
• Compliance: RoHS3 compliance and MSL Level 1 rating

Parts meeting all these parameters are classified as direct substitutes. The P2353ABL qualifies as a direct substitute based on identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both P2353ABL60 and P2353ABL are active products with identical electrical specifications and mechanical packaging. Selection between these parts is based on availability and inventory status. The P2353ABL maintains higher stock availability (2200 pcs) compared to P2353ABL60 (735 pcs). Both parts carry ROHS3 compliance and MSL Level 1 rating, confirming suitability for standard manufacturing and storage environments. No technical differentiation exists between these components for circuit design purposes.

Frequently Asked Questions (FAQ)

Q: Can P2353ABL be used as a direct replacement for P2353ABL60?

A: Yes. Both parts are identical in electrical performance, voltage ratings, current handling, and physical packaging. They are interchangeable in circuit applications.

Q: What determines if a part qualifies as a substitute for P2353ABL60?

A: Substitutes must match all specified parameters: 270V breakover voltage, 200V off-state voltage, 8V on-state voltage, 250A peak pulse current (8/20µs), 80A peak pulse current (10/1000µs), 150mA hold current, three-element configuration, 3-SIP package, through-hole mounting, and RoHS3 compliance.

Q: Are there differences in packaging between P2353ABL60 and P2353ABL?

A: No. Both use identical 3-SIP TO-220 Modified packaging with through-hole mounting.

Q: Do both parts meet the same compliance standards?

A: Yes. Both P2353ABL60 and P2353ABL are ROHS3 compliant with MSL Level 1 rating and REACH unaffected status.

Q: What is the primary reason to consider P2353ABL as an alternative?

A: Inventory availability. P2353ABL has higher stock levels, making it a practical alternative when P2353ABL60 stock is limited.