P2202ABL60 Equivalent & Substitute Parts

Part Overview

The P2202ABL60 is a SIDACtor® thyristor transient voltage suppressor manufactured by Littelfuse Inc., designed for overvoltage protection applications. This device operates with 90V and 180V off-state voltage ratings and handles peak pulse currents of 250A (8/20µs). The component is actively produced and fully compliant with RoHS3 and REACH regulations, making it suitable for modern electronic equipment requiring transient suppression in industrial and commercial applications.

Substitute parts are identified when they maintain identical electrical performance characteristics and mechanical compatibility within the same product category and packaging specification.

Substiute Parts

P2202ABL60

Littelfuse Inc.In Stock: 1103P2202ABL60 Datasheet

Current PartRFQ

P2202ABL

Littelfuse Inc.In Stock: 2234P2202ABL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the P2202ABL60 is determined by strict equivalence across the following critical parameters:

• Voltage ratings (Off-State: 90V, 180V; Breakover: 130V, 260V; On-State: 4V)
• Peak pulse current handling (8/20µs: 250A; 10/1000µs: 80A)
• Hold current specification (150mA)
• Element configuration (2 elements)
• Capacitance values (65pF, 115pF)
• Package type (3-SIP TO-220 Modified)
• Mounting method (Through Hole)
• Regulatory compliance (RoHS3, REACH)

Only parts meeting all these specifications are classified as direct substitutes. The P2202ABL qualifies as a direct equivalent based on identical electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the P2202ABL60 and P2202ABL are active products from Littelfuse Inc. with identical electrical specifications and mechanical packaging. Selection between these parts is based on availability and inventory status rather than technical performance differences.

The P2202ABL60 carries 1048 pieces in current inventory, while the P2202ABL maintains 2200 pieces in stock. Both components meet RoHS3 compliance requirements and carry REACH Unaffected status, making them suitable for applications subject to environmental and regulatory restrictions.

For applications requiring immediate availability or higher stock quantities, the P2202ABL is the preferred selection. For applications with specific part number requirements or documentation references to the P2202ABL60, direct substitution with P2202ABL is electrically and mechanically valid.

Frequently Asked Questions (FAQ)

Q: Can P2202ABL be used as a direct replacement for P2202ABL60?

A: Yes. Both parts are manufactured by Littelfuse Inc. and share identical electrical parameters, voltage ratings, current handling capabilities, and 3-SIP TO-220 Modified packaging. No circuit modifications or design changes are required.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution is valid when the following parameters match exactly: off-state voltage (90V, 180V), breakover voltage (130V, 260V), on-state voltage (4V), peak pulse current (250A at 8/20µs), hold current (150mA), element count (2), capacitance values (65pF, 115pF), and package type (3-SIP TO-220 Modified).

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both P2202ABL60 and P2202ABL carry identical RoHS3 compliance and REACH Unaffected status. MSL rating is 1 (Unlimited) for both components.

Q: What is the difference between P2202ABL60 and P2202ABL?

A: The parts are electrically and mechanically identical. The designation difference reflects internal Littelfuse part numbering conventions. Both are active products with full manufacturing support.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. The identical 3-SIP TO-220 Modified package and through-hole mounting specification ensure direct PCB footprint compatibility. No layout or assembly modifications are necessary.