Equivalent & Substitute Parts for P14-P47-C

Part Overview

The P14-P47-C is a Wire Pin Terminal Connector manufactured by Panduit Corp, designed for 14-16 AWG (2.5~2.0mm²) wire applications. This non-insulated, crimp-style terminal features a circular pin with tin-plated copper contact material and brazed seam construction. The part is classified as Obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure component availability for new designs and field replacements.

Substiute Parts

P14-P47-C

Panduit CorpIn Stock: 1164P14-P47-C Datasheet

Current PartRFQ

P14-P47-M

Panduit CorpIn Stock: 1112P14-P47-M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the P14-P47-C is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part P14-P47-M maintains identical specifications for wire gauge, pin diameter, pin length, overall length, barrel outer diameter, termination length, termination method, contact material, contact finish, insulation type, and construction features. Both parts belong to the Pan-Term® series and comply with ROHS3 and REACH requirements.

The primary distinction between P14-P47-C and P14-P47-M is product status: P14-P47-C is Obsolete, while P14-P47-M is Active. Packaging differs (P14-P47-C packaging unspecified; P14-P47-M supplied in Bulk), but this does not affect functional compatibility. The substitution is valid based on complete parameter alignment across all mechanical and electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The P14-P47-M is the direct equivalent for the obsolete P14-P47-C. Selection of P14-P47-M is appropriate for all applications currently using or specifying P14-P47-C. Both parts maintain identical electrical and mechanical characteristics, ensuring functional interchangeability without design modification.

P14-P47-M carries Active product status, confirming ongoing manufacturer support and supply availability. Both parts satisfy ROHS3 Compliance and REACH Unaffected requirements, supporting regulatory compliance in applications subject to these standards. The transition from P14-P47-C to P14-P47-M does not introduce compliance risk or performance degradation.

Frequently Asked Questions (FAQ)

Q: Can P14-P47-M be used as a direct replacement for P14-P47-C?

A: Yes. P14-P47-M is electrically and mechanically equivalent to P14-P47-C across all specified parameters, including wire gauge, pin dimensions, termination length, contact material, and finish. No design changes are required.

Q: What is the primary reason for substitution?

A: P14-P47-C is classified as Obsolete. P14-P47-M is the Active equivalent, ensuring continued supply availability and manufacturer support.

Q: Are there any compliance differences between the two parts?

A: No. Both P14-P47-C and P14-P47-M are ROHS3 Compliant and REACH Unaffected. Regulatory compliance status is identical.

Q: Does packaging differ between these parts?

A: Packaging specifications differ (P14-P47-C packaging unspecified; P14-P47-M supplied in Bulk). Packaging does not affect functional compatibility or electrical performance.

Q: What wire gauges are supported by P14-P47-M?

A: P14-P47-M supports 14-16 AWG wire (2.5~2.0mm²), identical to P14-P47-C.

Q: Are the pin dimensions identical?

A: Yes. Both parts feature a circular pin with 0.070" (1.78mm) diameter, 0.490" (12.45mm) pin length, and 0.750" (19.05mm) overall length.

Q: What is the contact material and finish?

A: Both parts use copper contact material with tin finish, providing consistent electrical conductivity and corrosion resistance.

Q: Is the termination method the same?

A: Yes. Both parts use crimp termination with identical termination length of 0.260" (6.60mm).