P14-610R-C Equivalent & Substitute Parts

Part Overview

The P14-610R-C is a ring terminal connector manufactured by Panduit Corp, designed for multi-stud applications with wire gauges from 14-18 AWG. This component features a brazed seam construction with copper contact material and tin finish, suitable for free-hanging in-line mounting configurations. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure design compatibility in applications requiring ring terminal connectors with comparable electrical and mechanical specifications.

Substiute Parts

P14-610R-C

Panduit CorpIn Stock: 1154P14-610R-C Datasheet

Current PartRFQ

P14-10R-C

Panduit CorpIn Stock: 6001P14-10R-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the P14-610R-C is determined by alignment across the following critical parameters:

Wire Gauge Compatibility: The substitute part must support 14-18 AWG wire gauge range to maintain electrical continuity and current-carrying capacity.

Termination Method: Crimp termination is required to ensure compatibility with existing assembly processes and tooling.

Contact Material and Finish: Copper contact material with tin finish ensures equivalent electrical conductivity and corrosion resistance characteristics.

Mounting Configuration: Free-hanging in-line mounting type maintains mechanical compatibility with existing circuit board and harness layouts.

Stud/Tab Size: The substitute part must accommodate the stud sizes present in the target application. The P14-610R-C supports 6, 8, and 10 stud configurations; substitute parts may support a subset of these sizes.

Insulation Status: Non-insulated construction maintains consistency with the original part's design intent.

The P14-10R-C qualifies as a substitute based on these parameters, with the distinction that it is optimized for 10 stud applications and features a circular terminal type rather than multi-stud configuration.

Parameter Comparison

Engineering Selection Recommendations

The P14-10R-C serves as the active equivalent for the obsolete P14-610R-C based on the following engineering criteria:

Product Status Alignment: The P14-10R-C maintains active product status with current manufacturing support, ensuring long-term availability and supply chain reliability compared to the obsolete P14-610R-C.

Electrical Specifications: Both parts maintain identical wire gauge specifications (14-18 AWG), copper contact material, and tin finish, ensuring equivalent electrical performance in circuit applications.

Mechanical Compatibility: Shared outer width dimension (0.310" / 7.87mm) and free-hanging in-line mounting type provide mechanical compatibility with existing assembly fixtures and harness configurations.

Regulatory Compliance: The P14-10R-C achieves ROHS3 compliance, meeting current environmental and material restriction requirements. The P14-610R-C is marked as not applicable for RoHS, reflecting its obsolete status.

Application Scope: Selection of the P14-10R-C is appropriate for applications requiring 10 stud connectivity. Applications requiring simultaneous support for 6, 8, and 10 stud configurations may require evaluation of alternative multi-stud terminal solutions within the Pan-Term® series.

Dimensional Considerations: The P14-10R-C exhibits a 0.090" (2.29mm) reduction in overall length and 0.002" (0.05mm) reduction in thickness compared to the P14-610R-C. These dimensional differences must be evaluated against specific mechanical constraints in the target application.

Frequently Asked Questions (FAQ)

Q: Can the P14-10R-C directly replace the P14-610R-C in all applications?

A: The P14-10R-C is compatible with applications requiring 10 stud connectivity. Applications requiring 6 or 8 stud configurations require alternative component selection. Both parts share identical wire gauge, contact material, contact finish, and mounting type specifications.

Q: What is the primary difference between the multi-stud P14-610R-C and the circular P14-10R-C?

A: The P14-610R-C features multi-stud terminal geometry supporting 6, 8, and 10 stud sizes. The P14-10R-C features circular terminal geometry optimized for 10 stud applications. The P14-10R-C includes serrated termination features not present in the P14-610R-C.

Q: Are there compliance differences between these parts?

A: The P14-10R-C is ROHS3 compliant, reflecting its active product status. The P14-610R-C is marked as not applicable for RoHS compliance due to its obsolete classification. Both parts maintain REACH unaffected status.

Q: What dimensional changes occur when substituting the P14-10R-C for the P14-610R-C?

A: The P14-10R-C is 0.090" (2.29mm) shorter in overall length and 0.002" (0.05mm) thinner than the P14-610R-C. Outer width dimensions remain identical at 0.310" (7.87mm). These dimensional differences must be evaluated against mechanical constraints in the target application.

Q: Do both parts use identical termination methods?

A: Both parts utilize crimp termination. The P14-10R-C includes serrated termination features that enhance mechanical grip during the crimp process.

Q: What wire gauge range is supported by the P14-10R-C?

A: The P14-10R-C supports 14-18 AWG wire gauge, identical to the P14-610R-C specification.

Q: Is the P14-10R-C suitable for non-insulated applications?

A: Yes. The P14-10R-C is manufactured as a non-insulated terminal, matching the non-insulated construction of the P14-610R-C.