P1330-823K Equivalent & Substitute Parts

Part Overview

The P1330-823K is a fixed unshielded surface mount inductor manufactured by API Delevan Inc. with an inductance value of 82 µH, rated for 362 mA continuous current, and a maximum DC resistance of 1.38 Ohm. The component features a ferrite core and operates across the temperature range of -55°C to 125°C. This part is currently active in production. Substitute parts are identified when equivalent electrical and mechanical specifications are maintained, allowing for component interchangeability in circuit applications where the original part number may be unavailable or when alternative compliance certifications are required.

Substiute Parts

P1330-823K

API Delevan Inc.In Stock: 944P1330-823K Datasheet

Current PartRFQ

P1330R-823K

API Delevan Inc.In Stock: 1486P1330R-823K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the P1330-823K is determined by strict equivalence across the following critical parameters:

• Inductance value: 82 µH with ±10% tolerance
• Current rating: 362 mA minimum
• DC resistance: 1.38 Ohm maximum
• Core material: Ferrite
• Shielding configuration: Unshielded
• Operating temperature range: -55°C to 125°C minimum
• Mounting type: Surface Mount
• Physical dimensions: 0.313" L x 0.115" W with height not exceeding 0.145"
• Inductance test frequency: 1 kHz

The P1330R-823K qualifies as a direct substitute based on identical electrical specifications and mechanical dimensions. Differences in RoHS compliance status do not affect functional interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Both the P1330-823K and P1330R-823K are active production components from API Delevan Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on regulatory compliance requirements applicable to the end application.

The P1330-823K is RoHS non-compliant and suitable for applications without RoHS restrictions. The P1330R-823K is ROHS3 compliant and required for applications subject to RoHS3 regulations or customer specifications mandating RoHS compliance. Both parts maintain REACH Unaffected status and carry EAR99 export classification.

Frequently Asked Questions (FAQ)

Q: Can P1330R-823K replace P1330-823K in existing designs?

A: Yes. The P1330R-823K is electrically and mechanically equivalent to the P1330-823K. Both components deliver identical inductance (82 µH), current rating (362 mA), DC resistance (1.38 Ohm max), and physical dimensions. Direct substitution is valid from a functional standpoint.

Q: What is the primary difference between these two part numbers?

A: The primary difference is RoHS compliance status. The P1330-823K is RoHS non-compliant, while the P1330R-823K is ROHS3 compliant. All other electrical and mechanical parameters are identical.

Q: Are there any package or mounting differences?

A: No. Both parts use identical nonstandard surface mount packages with dimensions of 0.313" L x 0.115" W and a maximum seated height of 0.145". Tape & Reel packaging is used for both.

Q: Which part should be selected for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance, use P1330R-823K. For applications without RoHS restrictions, either part is acceptable based on availability and cost considerations.

Q: Are the saturation current specifications identical?

A: Yes. Both parts have a saturation current (Isat) of 150 mA, indicating identical core performance characteristics.