Equivalent & Substitute Parts for P10-8LF-D

Part Overview

The P10-8LF-D is an 8 stud spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 10-14 AWG wire gauges. This non-insulated, tin-plated copper terminal features a brazed seam and serrated termination, suitable for free-hanging in-line mounting applications. The P10-8LF-D is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for continued system support and procurement.

Substiute Parts

P10-8LF-D

Panduit CorpIn Stock: 988P10-8LF-D Datasheet

Current PartRFQ

PN10-8LF-D

Panduit CorpIn Stock: 1270PN10-8LF-D Datasheet

MFR RecommendedRFQ

PV10-8LF-D

Panduit CorpIn Stock: 1825PV10-8LF-D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete P10-8LF-D is determined by strict alignment of the following critical parameters:

Electrical Compatibility Parameters:

• Stud/Tab Size: 8 Stud (fixed requirement for mating connector compatibility)
• Tongue Inside Opening: 0.160" (4.06mm) (fixed requirement for stud engagement)
• Contact Material: Copper (electrical conductivity requirement)
• Contact Finish: Tin (corrosion resistance and solderability)
• Terminal Type: Spring, Snap (mechanical engagement method)

Mechanical Compatibility Parameters:

• Mounting Type: Free Hanging (In-Line) (installation configuration)
• Termination Method: Crimp (wire attachment process)

Regulatory Compliance Parameters:

• RoHS Status: ROHS3 Compliant (environmental regulation requirement)

The substitute parts PN10-8LF-D and PV10-8LF-D satisfy all critical electrical and mechanical parameters. Both are active products with insulated designs and reduced wire gauge range (10-12 AWG versus 10-14 AWG), representing functional equivalents for applications within the 10-12 AWG overlap range.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: PN10-8LF-D

The PN10-8LF-D is the manufacturer-recommended equivalent for the obsolete P10-8LF-D. This part maintains all critical electrical and mechanical parameters including stud size, tongue opening, contact material, and contact finish. The PN10-8LF-D features polyamide (nylon) insulation and is classified as an active product with full ROHS3 compliance and REACH unaffected status. Wire gauge compatibility exists within the 10-12 AWG range, which overlaps with the original part's 10-14 AWG specification.

Secondary Substitute: PV10-8LF-D

The PV10-8LF-D provides an alternative equivalent with vinyl insulation material instead of polyamide. This part shares identical electrical and mechanical specifications with PN10-8LF-D, including stud size, tongue opening, contact material, finish, and wire gauge range. The PV10-8LF-D is active and maintains full ROHS3 compliance and REACH unaffected status.

Selection Criteria:

Both substitute parts are suitable for applications requiring 10-12 AWG wire termination. Selection between PN10-8LF-D and PV10-8LF-D depends on insulation material requirements specific to the application environment. Applications requiring 14 AWG wire termination cannot use either substitute and require alternative sourcing strategies.

Frequently Asked Questions (FAQ)

Q: Can PN10-8LF-D or PV10-8LF-D be used as direct replacements for P10-8LF-D?

A: Both PN10-8LF-D and PV10-8LF-D are functionally equivalent for applications using 10-12 AWG wire. The critical parameters—stud size (8), tongue opening (0.160"), contact material (copper), contact finish (tin), and mounting type (free hanging in-line)—are identical across all three parts. Applications limited to 14 AWG wire cannot use the substitutes.

Q: What is the difference between PN10-8LF-D and PV10-8LF-D?

A: The primary difference is insulation material. PN10-8LF-D uses polyamide (nylon) insulation, while PV10-8LF-D uses vinyl insulation. Both have identical insulation diameter (0.225"), electrical properties, and mechanical specifications. Selection depends on environmental compatibility requirements for the specific application.

Q: Why does the original P10-8LF-D have a wider wire gauge range (10-14 AWG) than the substitutes (10-12 AWG)?

A: The substitute parts are designed with insulation, which affects the crimp termination geometry and wire gauge compatibility. The non-insulated design of P10-8LF-D accommodated the extended 10-14 AWG range. For 14 AWG applications, alternative non-insulated terminals must be sourced.

Q: Are PN10-8LF-D and PV10-8LF-D compliant with current regulatory standards?

A: Both substitute parts are ROHS3 compliant and REACH unaffected, meeting current environmental and chemical safety regulations. The original P10-8LF-D also maintains ROHS3 compliance.

Q: What is the packaging difference between P10-8LF-D and the substitutes?

A: P10-8LF-D packaging is not specified in available documentation. Both PN10-8LF-D and PV10-8LF-D are supplied in bulk packaging. Specific packaging quantities should be confirmed with the supplier for procurement planning.

Q: Can these parts be used interchangeably in existing assemblies?

A: Interchangeability is confirmed for the 10-12 AWG wire gauge range based on identical stud size, tongue opening, contact material, and contact finish. Physical dimensions and mounting characteristics are compatible. Insulation material differences (polyamide versus vinyl) do not affect mechanical interchangeability but may affect performance in specific environmental conditions.