P10-14RHT6-D Equivalent & Substitute Parts

Part Overview

The P10-14RHT6-D is a ring terminal connector manufactured by Panduit Corp, designed for 10-12 AWG wire applications with a 1/4 inch stud connection. This circular terminal features a crimp termination method and is part of the Pan-Term® series. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure availability for new installations and repairs.

Substiute Parts

P10-14RHT6-D

Panduit CorpIn Stock: 898P10-14RHT6-D Datasheet

Current PartRFQ

P10-14RHT6-L

Panduit CorpIn Stock: 1070P10-14RHT6-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the P10-14RHT6-D is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications in the following areas:

Electrical Parameters: Wire gauge range (10-12 AWG), contact material (copper), and contact finish (nickel) ensure electrical conductivity and current-carrying capacity remain unchanged.

Mechanical Parameters: Stud size (1/4 inch), terminal type (circular), thickness (0.040 inches), width (0.530 inches), and overall length (0.960 inches) guarantee physical compatibility with mating components and mounting hardware.

Process Parameters: Termination method (crimp), insulation type (non-insulated), and features (brazed seam, serrated termination) ensure installation compatibility and performance characteristics.

Compliance Parameters: RoHS3 compliance and REACH unaffected status maintain regulatory alignment across substitution.

The substitute part P10-14RHT6-L meets all these criteria while offering active product status, ensuring continued availability and manufacturer support.

Parameter Comparison

Engineering Selection Recommendations

The P10-14RHT6-L is the direct equivalent substitute for the P10-14RHT6-D. Both parts are manufactured by Panduit Corp and share identical electrical, mechanical, and process specifications. The primary distinction is product status: the P10-14RHT6-D is obsolete while the P10-14RHT6-L maintains active status.

Selection of the P10-14RHT6-L is appropriate for all applications currently using or specifying the P10-14RHT6-D. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment. The active status of the P10-14RHT6-L provides assurance of continued manufacturer support, availability, and consistency in production quality.

Frequently Asked Questions (FAQ)

Q: Can the P10-14RHT6-L be used as a direct replacement for the P10-14RHT6-D?

A: Yes. The P10-14RHT6-L is a direct equivalent substitute. All electrical, mechanical, and process parameters are identical, including wire gauge (10-12 AWG), stud size (1/4 inch), contact material (copper with nickel finish), and termination method (crimp). Physical dimensions and mounting characteristics are unchanged.

Q: Why is the P10-14RHT6-D classified as obsolete?

A: The P10-14RHT6-D has reached end-of-life status with Panduit Corp. The P10-14RHT6-L serves as the active replacement, offering identical performance with continued manufacturer support and availability.

Q: Are there any compatibility concerns when substituting the P10-14RHT6-L for the P10-14RHT6-D?

A: No compatibility concerns exist. The substitute part maintains identical specifications across all critical parameters: terminal type, stud size, wire gauge range, contact material and finish, insulation type, physical dimensions, mounting type, and features. Installation procedures and performance characteristics remain unchanged.

Q: What is the difference between the P10-14RHT6-D and P10-14RHT6-L?

A: The parts are functionally identical. The difference is limited to product status: P10-14RHT6-D is obsolete while P10-14RHT6-L is active. Both are Panduit Pan-Term® series ring terminal connectors with identical specifications.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the P10-14RHT6-D and P10-14RHT6-L are ROHS3 compliant and REACH unaffected, ensuring equivalent regulatory alignment for applications requiring these certifications.

Q: What wire gauges are compatible with these terminals?

A: Both parts accommodate 10-12 AWG wire. The crimp termination method with serrated termination ensures secure connection within this gauge range.

Q: Is the 1/4 inch stud size compatible with standard electrical hardware?

A: Yes. The 1/4 inch stud size is a standard specification for ring terminal connectors and is compatible with common electrical hardware and mounting configurations using 1/4 inch fasteners.