P0K1.1206.2ST.B.S Equivalent & Substitute Parts

Part Overview

The P0K1.1206.2ST.B.S is an RTD (Resistance Temperature Detector) platinum temperature sensor manufactured by Innovative Sensor Technology, USA Division. This surface-mount component operates across a temperature range of -50°C to +150°C and provides a resistance value of 100 Ohms at 0°C. The sensor is packaged in a 2-SMD, No Lead configuration with SMD (SMT) tab termination, suitable for automated assembly processes. The part maintains Active product status with full ROHS3 compliance and REACH unaffected designation. Identifying equivalent and substitute parts is necessary when managing inventory constraints, addressing supply chain disruptions, or consolidating component specifications across manufacturing platforms.

Substiute Parts

P0K1.1206.2ST.B.S

Innovative Sensor Technology, USA DivisionIn Stock: 1152P0K1.1206.2ST.B.S Datasheet

Current PartRFQ

P0K1.1206.2ST.B.S

Innovative Sensor Technology, USA DivisionIn Stock: 1152P0K1.1206.2ST.B.S Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the P0K1.1206.2ST.B.S is determined by strict alignment across the following critical parameters:

Electrical Specifications:

• Resistance value at 0°C: 100 Ohms
• RTD material composition: Platinum (Pt)
• Temperature coefficient: 3850 ppm/°C
• Operating temperature range: -50°C to +150°C
• Current rating: 1 mA

Mechanical & Package Specifications:

• Package configuration: 2-SMD, No Lead
• Termination style: SMD (SMT) Tabs
• Mounting technology: Surface Mount

Compliance & Status:

• RoHS3 compliance requirement
• REACH unaffected status
• Active product status

Substitute parts must match all electrical specifications, package dimensions, termination type, and compliance certifications. Deviations in any of these parameters disqualify a component from direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The P0K1.1206.2ST.B.S maintains Active product status with full regulatory compliance across ROHS3 and REACH designations. Component selection should prioritize parts with identical electrical specifications (100 Ohms at 0°C, platinum RTD material, 3850 ppm/°C temperature coefficient) and matching package configurations (2-SMD, No Lead with SMD tab termination). The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints during storage or handling. Surface-mount assembly compatibility is ensured through standardized SMT tab termination. All substitute candidates must maintain Active product status and equivalent compliance certifications to ensure long-term supply chain viability and regulatory adherence in production environments.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the P0K1.1206.2ST.B.S?

A: A valid substitute must match the following specifications: 100 Ohms resistance at 0°C, platinum RTD material, 3850 ppm/°C temperature coefficient, -50°C to +150°C operating range, 2-SMD No Lead package, SMD tab termination, 1 mA current rating, ROHS3 compliance, and Active product status.

Q: Can I substitute this RTD sensor with a different resistance value?

A: No. The 100 Ohm resistance value at 0°C is a critical electrical parameter. Substitution with different resistance values (such as 50 Ohm or 200 Ohm RTD sensors) will result in circuit incompatibility and measurement errors.

Q: Are there package alternatives for this 2-SMD, No Lead configuration?

A: No. The 2-SMD, No Lead package with SMD tab termination is specific to this component's surface-mount design. Alternative package styles (such as through-hole or different SMD configurations) are not direct substitutes.

Q: Does the temperature coefficient value affect substitution eligibility?

A: Yes. The 3850 ppm/°C temperature coefficient is a fundamental RTD characteristic that determines sensor accuracy across the operating temperature range. Substitutes must match this specification exactly.

Q: What is the significance of the MSL rating for this component?

A: The MSL rating of 1 (Unlimited) indicates this component has no moisture sensitivity limitations. It can be stored and handled without special moisture control measures, simplifying inventory management and reducing handling constraints.

Q: Is ROHS3 compliance mandatory for substitution?

A: Yes. ROHS3 compliance is a regulatory requirement for this component. Any substitute must maintain equivalent ROHS3 compliance status to ensure regulatory adherence in manufacturing and end-use applications.

Q: Can I use a different RTD material (such as nickel or copper) as a substitute?

A: No. The platinum (Pt) RTD material is specified for this application. Different RTD materials have different temperature coefficients and resistance characteristics, making them incompatible substitutes.