P08-030PLTC-A-G Equivalent & Substitute Parts

Part Overview

The P08-030PLTC-A-G is a 30-position rectangular connector plug manufactured by 3M, designed for surface mount applications with center strip contacts and gold plating. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing design support and procurement planning. The P08 series provides standardized connector solutions for applications requiring reliable electrical interconnection with consistent pitch and contact geometry.

Substiute Parts

P08-030PLTC-A-G

3MIn Stock: 961P08-030PLTC-A-G Datasheet

Current PartRFQ

P08-030PLC-B-G

3MIn Stock: 1192P08-030PLC-B-G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the P08-030PLTC-A-G is determined by the following critical parameters that must remain constant:

• Connector Type & Series: Plug configuration within the P08 series
• Electrical Interface: 30-position contact arrangement with 0.031" (0.80mm) pitch
• Physical Configuration: 2-row layout with center strip contacts
• Mounting Technology: Surface mount assembly compatibility
• Contact Material & Finish: Gold plating at 8.00µin thickness
• Environmental Rating: MSL 1 classification

The P08-030PLC-B-G maintains all critical electrical and mechanical parameters required for functional equivalence. Variations in mated stacking heights and height above board represent design evolution within the P08 series while preserving connector interface compatibility.

Parameter Comparison

Engineering Selection Recommendations

The P08-030PLC-B-G serves as the active production equivalent for the obsolete P08-030PLTC-A-G. Both components share identical electrical interface specifications, contact geometry, and pitch characteristics, ensuring functional compatibility within the P08 connector ecosystem.

The substitute part offers the advantage of active product status with RoHS compliance certification, supporting long-term supply chain continuity and regulatory alignment. The dimensional variation in height above board (0.147" versus 0.107") and mated stacking heights (4mm/7mm versus 3mm/6mm) reflects design refinement within the series and must be evaluated against specific PCB layout and mating interface requirements.

Selection between these parts should be based on design constraints related to available board space and connector stack height requirements. Both components maintain identical contact finish specifications and MSL ratings, ensuring equivalent environmental performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can the P08-030PLC-B-G directly replace the P08-030PLTC-A-G in existing designs?

A: Electrical and contact interface compatibility is maintained. The primary design consideration is the increased height above board (0.147" versus 0.107") and mated stacking heights (4mm/7mm versus 3mm/6mm). PCB layout and connector stack clearance must be evaluated for each application.

Q: What is the significance of the product status change from Obsolete to Active?

A: Active status indicates ongoing manufacturing and supply availability. This supports procurement planning and reduces risk of future component discontinuation.

Q: Are there differences in contact reliability between these parts?

A: Both components specify identical contact finish thickness (8.00µin gold) and MSL ratings (1 - Unlimited), indicating equivalent environmental performance and contact durability characteristics.

Q: Does RoHS compliance affect electrical performance?

A: RoHS compliance in the P08-030PLC-B-G reflects material composition changes to eliminate restricted substances. Electrical performance and contact interface specifications remain equivalent to the original part.

Q: What packaging considerations apply to these connectors?

A: Both components are surface mount connectors with identical pitch (0.031"/0.80mm) and position count (30). Packaging format differences, if any, are not specified in the provided data and should be confirmed with the manufacturer for specific procurement requirements.