P08-020SLTC-A-G Equivalent & Substitute Parts

Part Overview

The P08-020SLTC-A-G is a 20-position rectangular connector socket manufactured by 3M, designed for surface mount applications with outer shroud contacts and gold plating. This component is classified as obsolete, making identification of active equivalent parts essential for ongoing production and design continuity. The substitute part P08-020SLT-A-G provides functional equivalence while maintaining active product status and full RoHS compliance.

Substiute Parts

P08-020SLTC-A-G

3MIn Stock: 727P08-020SLTC-A-G Datasheet

Current PartRFQ

P08-020SLT-A-G

3MIn Stock: 872P08-020SLT-A-G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The P08-020SLT-A-G qualifies as a direct substitute for the P08-020SLTC-A-G based on identical electrical and mechanical parameters. Substitution is determined by the following critical parameters:

• 20-position socket configuration with 0.031" (0.80mm) pitch
• 2-row arrangement with outer shroud contact design
• Surface mount technology with board guide feature
• Gold contact finish at 8.00µin thickness
• Identical mated stacking heights (3mm, 4mm, 5mm)
• Consistent height above board at 0.087" (2.20mm)
• MSL rating of 1 (Unlimited)

Both parts belong to the P08 series and maintain identical electrical and mechanical specifications. The primary distinction is product status and compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The P08-020SLT-A-G is the recommended substitute for the obsolete P08-020SLTC-A-G. Selection is based on the following engineering criteria:

Product Status: The substitute part maintains active product status, ensuring continued availability and supply chain reliability. The main part is classified as obsolete, creating sourcing constraints for new designs and production runs.

Compliance: The P08-020SLT-A-G carries explicit RoHS compliance certification, meeting current regulatory requirements for electronic components in most markets. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Electrical and Mechanical Compatibility: All critical parameters—connector configuration, position count, pitch, mounting type, contact finish, and dimensional specifications—are identical between the two parts. Direct substitution is electrically and mechanically sound without design modification.

Supply Availability: The substitute part has 844 pieces in new original stock, compared to 694 pieces for the obsolete main part, providing superior supply assurance for production planning.

Frequently Asked Questions (FAQ)

Q: Can P08-020SLT-A-G be used as a direct replacement for P08-020SLTC-A-G?

A: Yes. Both parts are electrically and mechanically identical. They share the same 20-position socket configuration, 0.031" pitch, surface mount technology, gold contact finish, and dimensional specifications. No design modification is required.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and compliance certification. The P08-020SLTC-A-G is obsolete, while the P08-020SLT-A-G is active and RoHS compliant. The part number variation reflects manufacturing or certification updates within the P08 series.

Q: Are the mated stacking heights compatible?

A: Yes. Both parts support identical mated stacking heights of 3mm, 4mm, and 5mm, ensuring compatibility with existing mating connectors and PCB designs.

Q: Does the substitute part meet RoHS requirements?

A: Yes. The P08-020SLT-A-G is explicitly RoHS compliant. If RoHS compliance is a requirement for your application, the substitute part satisfies this criterion.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.

Q: Are there any dimensional differences between the two parts?

A: No. Both parts have identical height above board (0.087" / 2.20mm) and support the same mated stacking heights. PCB footprints and assembly processes remain unchanged.