P0724UBRP Equivalent & Substitute Parts

Part Overview

The P0724UBRP is a Transient Voltage Suppressor (TVS) thyristor from Littelfuse Inc., part of the SIDACtor® series. This component is designed for overvoltage protection applications requiring 65V/130V off-state voltage rating with 250A peak pulse current capability in a 6-SMD Gull Wing surface mount package. The P0724UBRP is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Substiute Parts

P0724UBRP

Littelfuse Inc.In Stock: 1234P0724UBRP Datasheet

Current PartRFQ

P0724UBLRP

Littelfuse Inc.In Stock: 1255P0724UBLRP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The P0724UBLRP qualifies as a direct substitute for the P0724UBRP based on identical electrical and mechanical parameters. Substitution eligibility is determined by the following criteria:

• Voltage ratings (breakover, off-state, and on-state) must match exactly
• Peak pulse current specifications (8/20µs and 10/1000µs) must be identical
• Hold current (Ih) must be equivalent
• Number of internal elements must match
• Capacitance values must be the same
• Package type and mounting configuration must be identical
• Supplier device package designation must be compatible

The P0724UBLRP meets all these requirements, with the primary distinction being packaging format (Tape & Reel versus bulk) and product status (Active versus Obsolete).

Parameter Comparison

Engineering Selection Recommendations

The P0724UBLRP is the direct functional equivalent of the P0724UBRP for all electrical and mechanical applications. Selection between these parts should be based on the following factors:

For new designs and ongoing production requiring RoHS compliance, the P0724UBLRP is the appropriate choice, as it meets ROHS3 compliance standards while the P0724UBRP does not. Both parts share identical electrical performance characteristics and physical package specifications.

For legacy system support where the P0724UBRP is specified, the P0724UBLRP provides full functional compatibility with the added benefit of active product status and improved regulatory compliance. The packaging format difference (Tape & Reel for P0724UBLRP versus bulk for P0724UBRP) does not affect electrical or mechanical performance.

Frequently Asked Questions (FAQ)

Q: Can the P0724UBLRP be used as a direct replacement for the P0724UBRP in existing designs?

A: Yes. The P0724UBLRP is electrically and mechanically identical to the P0724UBRP. All voltage ratings, current specifications, capacitance values, and package configurations are equivalent. The primary differences are product status (Active versus Obsolete) and RoHS compliance level.

Q: What is the difference between the P0724UBRP and P0724UBLRP packaging?

A: The P0724UBRP is supplied in bulk packaging, while the P0724UBLRP is supplied in Tape & Reel (TR) format. Both use the same 6-SMD Gull Wing package and Modified MS-013 supplier device package. The packaging format does not affect component performance or PCB assembly compatibility.

Q: Is the P0724UBLRP RoHS compliant?

A: Yes. The P0724UBLRP is ROHS3 compliant. The P0724UBRP is not RoHS compliant. For applications requiring RoHS compliance, the P0724UBLRP must be specified.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts have identical electrical specifications: 65V/130V off-state voltage, 88V/176V breakover voltage, 4V on-state voltage, 250A peak pulse current (8/20µs), 80A peak pulse current (10/1000µs), 150mA hold current, and 85pF/145pF capacitance values.

Q: What is the moisture sensitivity level for these components?

A: Both the P0724UBRP and P0724UBLRP have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.