OYLTDLJANF-26.000000 Equivalent & Substitute Parts

Part Overview

The OYLTDLJANF-26.000000 is a 26 MHz XO (Standard) CMOS oscillator manufactured by Taitien, designed for surface mount applications requiring a 1.2V supply with enable/disable functionality. This component operates across the industrial temperature range of -40°C to 85°C and delivers frequency stability of ±25ppm.

The OYLTDLJANF-26.000000 carries an obsolete product status. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for applications utilizing this oscillator.

Substiute Parts

OYLTDLJANF-26.000000

TaitienIn Stock: 957OYLTDLJANF-26.000000 Datasheet

Current PartRFQ

OCKTDLJANF-26.000000

TaitienIn Stock: 1197OCKTDLJANF-26.000000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the OYLTDLJANF-26.000000 is determined by the following critical parameters:

Frequency Match: The substitute part must operate at 26 MHz to maintain system timing requirements.

Output Configuration: CMOS output type must be preserved for signal compatibility with downstream circuitry.

Enable/Disable Function: The substitute must retain enable/disable capability for power management integration.

Frequency Stability: ±25ppm stability specification must be maintained for timing accuracy.

Operating Temperature Range: The substitute must support the full -40°C to 85°C industrial temperature range.

Package and Mounting: 4-SMD, No Lead surface mount package ensures PCB layout compatibility.

Compliance Standards: RoHS3 compliance and MSL 1 rating are required for manufacturing and environmental standards adherence.

The OCKTDLJANF-26.000000 qualifies as a substitute part based on matching frequency, output type, function, frequency stability, temperature range, package configuration, and compliance certifications. The primary design consideration is the supply voltage difference (1.8V versus 1.2V), which requires circuit-level evaluation for power supply compatibility.

Parameter Comparison

Engineering Selection Recommendations

The OCKTDLJANF-26.000000 is an active product from Taitien that maintains functional equivalence with the obsolete OYLTDLJANF-26.000000 across frequency, output type, enable/disable function, frequency stability, and operating temperature specifications.

Supply Voltage Consideration: The substitute operates at 1.8V compared to the main part's 1.2V. This difference requires verification that the power supply architecture can accommodate the higher voltage requirement without circuit modification.

Physical Dimensions: The substitute part is larger (7.00mm x 5.00mm versus 2.50mm x 2.00mm) with increased height (1.50mm versus 0.96mm). PCB layout and component placement must be evaluated for spatial compatibility.

Current Consumption: The substitute draws higher maximum supply current (7mA versus 1.5mA) and lower disable current (10µA versus 100µA). Power budget analysis is required for applications with strict power constraints.

Compliance Status: Both parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with current manufacturing and environmental standards.

The OCKTDLJANF-26.000000 is suitable for applications where the voltage, size, and current parameters align with system requirements.

Frequently Asked Questions (FAQ)

Q: Can the OCKTDLJANF-26.000000 directly replace the OYLTDLJANF-26.000000 without circuit modification?

A: Direct replacement requires evaluation of three factors: (1) power supply capability to deliver 1.8V instead of 1.2V, (2) PCB layout accommodation of the larger package dimensions, and (3) power budget tolerance for increased supply current. If all three factors are compatible with the application, substitution is feasible.

Q: What is the primary difference between these two parts?

A: The main differences are supply voltage (1.8V versus 1.2V), package size (7.00mm x 5.00mm versus 2.50mm x 2.00mm), and current consumption characteristics. The frequency, output type, function, and stability specifications are identical.

Q: Why is the main part marked as obsolete?

A: The OYLTDLJANF-26.000000 carries an obsolete status, indicating it is no longer in active production. The OCKTDLJANF-26.000000 is the active equivalent from the same manufacturer.

Q: Are both parts RoHS compliant?

A: Yes, both the OYLTDLJANF-26.000000 and OCKTDLJANF-26.000000 are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the impact of the size difference on PCB design?

A: The substitute part is approximately 2.8 times larger in length and width, with 56% greater height. PCB layout must be re-evaluated to ensure the larger footprint does not conflict with adjacent components or design constraints.

Q: Does the substitute part support the same enable/disable functionality?

A: Yes, both parts provide enable/disable function for power management control.

Q: What is the frequency stability specification for both parts?

A: Both parts maintain ±25ppm frequency stability across the -40°C to 85°C operating temperature range.