OXETGLJANF-16.000000 Equivalent & Substitute Parts

Part Overview

The OXETGLJANF-16.000000 is a 16 MHz XO (Standard) CMOS oscillator manufactured by Taitien, designed for applications requiring a crystal-based frequency reference with enable/disable functionality. This Surface Mount Device (SMD) operates at 3.3V supply voltage with ±50ppm frequency stability across the -40°C to 85°C temperature range. The part is Active status and ROHS3 compliant, making it suitable for modern electronic applications. Equivalent and substitute parts are identified to provide design flexibility, inventory alternatives, and supply chain continuity.

Substiute Parts

OXETGLJANF-16.000000

TaitienIn Stock: 921OXETGLJANF-16.000000 Datasheet

Current PartRFQ

LFSPXO025494

IQD Frequency ProductsIn Stock: 8180LFSPXO025494 Datasheet

DirectRFQ

SXO32C3A481-16.000M

Suntsu Electronics, Inc.In Stock: 3686SXO32C3A481-16.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the OXETGLJANF-16.000000 are qualified based on the following critical parameters that must match or remain compatible:

• Frequency: 16 MHz (exact match required)
• Output Type: CMOS (exact match required)
• Voltage - Supply: 3.3V (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Function: Enable/Disable (exact match required)
• Package / Case: 4-SMD, No Lead (exact match required)
• Size / Dimension: 0.126" L x 0.098" W (3.20mm x 2.50mm) (exact match required)
• Mounting Type: Surface Mount (exact match required)

The identified substitute parts meet all critical electrical and mechanical parameters. Variations in current supply specifications and packaging format (Tape & Reel versus Bulk) do not affect functional equivalence for circuit-level applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—OXETGLJANF-16.000000 (Taitien), LFSPXO025494 (IQD Frequency Products), and SXO32C3A481-16.000M (Suntsu Electronics)—are Active status products with ROHS3 compliance and REACH Unaffected certification. They are functionally equivalent for 16 MHz CMOS oscillator applications requiring 3.3V supply and enable/disable control.

Selection between these parts may be based on:

• Supply chain availability and inventory levels
• Packaging preference (Tape & Reel versus Bulk)
• Current consumption requirements (LFSPXO025494 draws 7mA maximum versus 10mA for the other two)
• Height clearance constraints (LFSPXO025494 and SXO32C3A481-16.000M have 0.047" maximum seated height versus 0.043" for OXETGLJANF-16.000000)

Frequently Asked Questions (FAQ)

Q: Can LFSPXO025494 be used as a direct replacement for OXETGLJANF-16.000000?

A: Yes. Both parts meet identical electrical specifications (16 MHz, CMOS output, 3.3V supply, ±50ppm stability, -40°C to 85°C operation, enable/disable function) and share the same 4-SMD, No Lead package with 3.20mm x 2.50mm footprint. The LFSPXO025494 has lower maximum current consumption (7mA versus 10mA) and slightly greater seated height (0.047" versus 0.043"), which may be advantageous or require verification depending on circuit design constraints.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel packaging is used for automated assembly processes and provides parts wound on carrier tape for pick-and-place equipment. Bulk packaging is used for manual assembly or lower-volume applications. Both packaging formats contain identical components; the difference is in handling and delivery method only.

Q: Are all three parts suitable for high-temperature applications?

A: Yes. All three parts operate across the -40°C to 85°C temperature range with ±50ppm frequency stability maintained throughout this range.

Q: Does the height difference between parts affect PCB layout?

A: The height difference between OXETGLJANF-16.000000 (0.043" maximum) and the other two substitutes (0.047" maximum) is 0.004" (0.10mm). This difference is negligible for most applications but should be verified if the design has strict height constraints or uses conformal coating processes.

Q: Are all parts RoHS and REACH compliant?

A: Yes. All three parts are ROHS3 compliant and REACH Unaffected, meeting environmental and regulatory requirements for modern electronics manufacturing.