OVLAS6CB8 Equivalent & Substitute Parts Reference

Part Overview

The OVLAS6CB8, manufactured by TT Electronics/Optek Technology, is a 3mm through-hole red LED characterized by a colorless, clear lens, 1100mcd brightness at 20mA, and a dominant wavelength of 628nm. This model is designated as obsolete, necessitating the identification of suitable substitute parts for continued production, repair, or design compatibility. Substitute selection must ensure electrical, optical, and mechanical matching based strictly on the parameters provided.

Substiute Parts

OVLAS6CB8

TT Electronics/Optek TechnologyIn Stock: 1166OVLAS6CB8 Datasheet

Current PartRFQ

OVLBR4C7

TT Electronics/Optek TechnologyIn Stock: 66922OVLBR4C7 Datasheet

MFR RecommendedRFQ

151033RS03000

Würth ElektronikIn Stock: 5136151033RS03000 Datasheet

MFR RecommendedRFQ

264-7SURC/S400-A8

Everlight Electronics Co LtdIn Stock: 930264-7SURC/S400-A8 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for OVLAS6CB8 are determined using only the provided parameters: color (red), through-hole mounting, lens characteristics, lens size, electrical ratings (forward voltage at 20mA), viewing angle, package/case, and regulatory statuses. Only components matching these key parameters are included in the substitute list. Substitution logic excludes parameters not present in the input.

Key substitution determinants:

• Color: Red LED
• Mounting Type: Through Hole
• Lens Style: Round with Domed Top
• Lens Color and Transparency: Colorless, clear
• Lens Size: 3mm class
• Voltage - Forward (Vf) (Typ) at 20mA
• Dominant Wavelength: Similar to 628nm
• Millicandela Rating
• Viewing Angle
• Package / Case: Radial, 3mm
• Regulatory statuses: RoHS and REACH comparability

Parameter Comparison

Engineering Selection Recommendations

The OVLAS6CB8 is classified as obsolete with bulk packaging and standard regulatory compliance. All substitute parts listed (OVLBR4C7, 151033RS03000, 264-7SURC/S400-A8) indicate active status, RoHS3 or equivalent compliance, and unrestricted moisture sensitivity levels. REACH and ECCN statuses align. Selection from this group can be based on availability and regulatory conformity as supplied in the data.

Frequently Asked Questions (FAQ)

Q1. What parameters determine suitable substitutes for OVLAS6CB8?
Substitute selection is defined by color (red), through-hole mounting, lens style and dimensions, electrical ratings at the test current, viewing angle, package/case compatibility, and regulatory status.

Q2. Are the substitute parts mechanically compatible with the original OVLAS6CB8?
All listed substitutes share a radial, through-hole case and 3mm class lens size. This supports compatibility with the same PCB footprints where mechanical parameters match.

Q3. Do the substitute parts comply with EU RoHS and REACH regulations?
Each substitute part meets RoHS3 and REACH unaffected status per the provided input.

Q4. Are the substitutes classified for unrestricted moisture sensitivity?
All parts are noted with Moisture Sensitivity Level (MSL) 1 (Unlimited), equivalent to the original product.

Q5. What differences exist in optical performance among the substitutes?
Millicandela ratings, dominant wavelengths, and viewing angles vary among substitutes. Only parameters presented above are considered in compatibility and selection.