OSTVI054150 Equivalent & Substitute Parts

Part Overview

The OSTVI054150 is a 5-position wire-to-board terminal block manufactured by On Shore Technology Inc., designed for vertical PCB mounting with 7.5mm pitch spacing. This component features screw-based rising cage clamp termination and is rated for 16A at 300V operation across a -30°C to 105°C temperature range. The OSTVI054150 is classified as obsolete, making identification of functionally equivalent substitute parts essential for ongoing design support and procurement continuity.

Substiute Parts

OSTVI054150

On Shore Technology Inc.In Stock: 946OSTVI054150 Datasheet

Current PartRFQ

ED360/5

On Shore Technology Inc.In Stock: 1061ED360/5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the OSTVI054150 is determined by strict equivalence across the following critical parameters:

• Position count and pitch: 5 positions at 0.295" (7.50mm) spacing
• Electrical ratings: 16A current and 300V voltage minimum
• Mounting configuration: Through-hole vertical orientation with PCB board contact
• Termination method: Screw-based rising cage clamp mechanism
• Mechanical compatibility: M3 screw thread for consistent assembly

The ED360/5 meets all substitution criteria. Both components share identical position count, pitch, mating orientation, current/voltage ratings, mounting type, and termination mechanism. Variations in wire gauge acceptance range (12-22 AWG for ED360/5 versus 12-28 AWG for OSTVI054150) and material specifications do not preclude substitution when wire gauges remain within the ED360/5 acceptable range.

Parameter Comparison

Engineering Selection Recommendations

The ED360/5 is the direct substitute for OSTVI054150 applications. Both components are manufactured by On Shore Technology Inc. and maintain identical electrical and mechanical specifications across all critical parameters. The ED360/5 offers the advantage of active product status with current manufacturing support and inventory availability (990 pcs in stock versus 936 pcs for the obsolete OSTVI054150).

For applications utilizing wire gauges between 23-28 AWG, design verification is required to confirm compatibility with the ED360/5 wire gauge range of 12-22 AWG. Both components maintain ROHS3 compliance and identical operating temperature specifications, ensuring regulatory and thermal equivalence.

Frequently Asked Questions (FAQ)

Q: Can ED360/5 be used as a direct replacement for OSTVI054150 in existing designs?

A: Yes, ED360/5 is a direct substitute when wire gauges remain within the 12-22 AWG range. All electrical ratings, mechanical dimensions, pitch spacing, and mounting configurations are identical. The primary difference is product status: ED360/5 is active with ongoing manufacturer support.

Q: What is the significance of the wire gauge difference between these parts?

A: OSTVI054150 accepts 12-28 AWG wire, while ED360/5 accepts 12-22 AWG. If your application uses wire gauges 23-28 AWG, ED360/5 may not accommodate these larger gauges. Verify wire gauge requirements before substitution.

Q: Are there packaging differences between OSTVI054150 and ED360/5?

A: OSTVI054150 is supplied in standard packaging, while ED360/5 is supplied in bulk packaging. Both are identical components; packaging format does not affect electrical or mechanical performance.

Q: Do both parts meet the same compliance standards?

A: Yes. Both OSTVI054150 and ED360/5 are ROHS3 compliant, REACH unaffected, and classified under the same ECCN (EAR99) and HTSUS codes (8536.90.4000).

Q: What is the torque specification for screw assembly?

A: OSTVI054150 specifies 0.4 Nm (3.5 Lb-In) torque, while ED360/5 specifies 0.5 Nm (4.4 Lb-In). Use the appropriate torque value for each component during assembly to ensure proper clamp force and electrical contact.