OSTVF065050 Equivalent & Substitute Parts

Part Overview

The OSTVF065050 is a 6-position terminal block header manufactured by On Shore Technology Inc., designed for vertical through-hole mounting with male pins and 2-side shrouding. This component operates at 300V UL with a 15A current rating and 0.200" (5.08mm) pitch configuration. The part is actively produced and RoHS3 compliant, making it suitable for industrial and commercial applications requiring reliable electrical connections. Substitute parts may be required due to inventory constraints, manufacturing discontinuation, or specific application requirements for alternative mounting or termination methods.

Substiute Parts

OSTVF065050

On Shore Technology Inc.In Stock: 853OSTVF065050 Datasheet

Current PartRFQ

EDSTLZ975/3

On Shore Technology Inc.In Stock: 1155EDSTLZ975/3 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The EDSTLZ975/3 qualifies as a direct substitute based on the following critical parameters that determine functional compatibility:

Matching Parameters:

• Number of Positions: 6
• Positions Per Level: 3
• Number of Levels: 2
• Pitch: 0.200" (5.08mm)
• Header Orientation: Vertical
• Type: Header, Male Pins, Shrouded (2 Side)
• Voltage - UL: 300 V
• Operating Temperature: -30°C ~ 105°C
• Contact Tail Length: 0.154" (3.90mm)
• RoHS Status: ROHS3 Compliant
• Product Status: Active

Differing Parameters:

• Mounting Type: OSTVF065050 uses Through Hole; EDSTLZ975/3 uses Solder
• Housing Material: OSTVF065050 uses Thermoplastic; EDSTLZ975/3 uses Polyamide (PA), Nylon
• Insulation Height: OSTVF065050 is 0.866" (22.00mm); EDSTLZ975/3 is 0.154" (3.90mm)

The substitution is valid where the alternative mounting method (solder vs. through-hole) and housing material are acceptable for the application.

Parameter Comparison

Engineering Selection Recommendations

Both the OSTVF065050 and EDSTLZ975/3 maintain active product status and full RoHS3 compliance, ensuring regulatory alignment for current applications. Selection between these parts depends on PCB assembly methodology: the OSTVF065050 is specified for through-hole mounting processes, while the EDSTLZ975/3 is designed for surface-mount solder attachment. The housing material difference (Thermoplastic vs. Polyamide) does not affect electrical performance within the specified operating temperature range of -30°C to 105°C. Both parts support identical electrical ratings of 300V UL and maintain the same 6-position, 5.08mm pitch configuration. Component selection should align with existing PCB design and assembly capabilities.

Frequently Asked Questions (FAQ)

Q: Can EDSTLZ975/3 replace OSTVF065050 in an existing design? A: Substitution is possible only if the PCB assembly process can accommodate solder mounting instead of through-hole mounting. The electrical specifications and connector geometry are equivalent.

Q: What is the primary difference between these two parts? A: The OSTVF065050 uses through-hole mounting with thermoplastic housing, while the EDSTLZ975/3 uses solder mounting with polyamide housing. Both maintain identical electrical ratings and position configurations.

Q: Are both parts RoHS3 compliant? A: Yes, both OSTVF065050 and EDSTLZ975/3 are RoHS3 compliant and actively produced.

Q: Do these parts have the same voltage and current ratings? A: Yes, both parts are rated for 300V UL and support the same electrical specifications within the -30°C to 105°C operating temperature range.

Q: What determines whether a substitute part is acceptable? A: Substitution validity is determined by matching electrical ratings (voltage, current), connector position count and pitch, shrouding configuration, operating temperature range, and compatibility with the assembly method (through-hole vs. solder mounting).