OSTV7101151 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The OSTV7101151 is a 10-position terminal block header manufactured by On Shore Technology Inc., featuring female sockets with 0.138" (3.50mm) pitch and 90° right-angle orientation for through-hole mounting. This component is classified as obsolete, making identification of compatible substitute parts essential for ongoing system maintenance and new design implementations. The part operates within a 300V UL rating and 8A current capacity, suitable for industrial control and signal distribution applications.

Substiute Parts

OSTV7101151

On Shore Technology Inc.In Stock: 956OSTV7101151 Datasheet

Current PartRFQ

1830498

Phoenix ContactIn Stock: 7561830498 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the OSTV7101151 is determined by strict alignment of the following critical parameters:

• Position Count & Pitch: 10 positions at 0.138" (3.50mm) spacing (non-negotiable for PCB layout compatibility)
• Header Type & Orientation: Female socket configuration with 90° right-angle mounting
• Mounting Technology: Through-hole solder termination
• Electrical Ratings: Minimum 8A current capacity and 300V voltage rating (UL standard)
• Flammability Compliance: UL94 V-0 material rating
• Environmental Compliance: RoHS compliance status

The Phoenix Contact 1830498 satisfies all substitution criteria through identical mechanical and electrical specifications, with enhanced compliance certifications and active product status.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1830498 is a direct functional equivalent to the OSTV7101151. Both components meet identical electrical specifications (8A/300V UL ratings) and mechanical requirements (10-position, 3.50mm pitch, 90° right-angle through-hole configuration). The 1830498 offers the advantage of active product status with current manufacturing support, whereas the OSTV7101151 is obsolete and subject to inventory depletion.

Both parts maintain UL94 V-0 flammability compliance and RoHS certification, satisfying regulatory requirements for industrial applications. The 1830498 is manufactured by Phoenix Contact under the COMBICON IMC series, a widely recognized connector platform with established supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1830498 replace the OSTV7101151 in existing designs?

A: Yes. Both components share identical position count (10), pitch spacing (3.50mm), orientation (90° right-angle), mounting method (through-hole solder), and electrical ratings (8A/300V UL). PCB footprints and connector mating interfaces are compatible.

Q: What are the key differences between these two parts?

A: The primary differences are product status (OSTV7101151 is obsolete; 1830498 is active), housing material (thermoplastic vs. liquid crystal polymer), contact tail length (0.134" vs. 0.079"), and insulation height (0.260" vs. 0.248"). These dimensional variations do not affect electrical function or standard PCB mounting applications.

Q: Are there compliance or certification differences?

A: Both parts meet UL94 V-0 flammability requirements and RoHS compliance. The 1830498 additionally specifies IEC current and voltage ratings (8A/320V IEC), providing broader international standards coverage.

Q: What packaging options are available?

A: The OSTV7101151 is supplied in standard packaging. The 1830498 is available in bulk packaging, suitable for production volume requirements.

Q: Is the 1830498 suitable for new designs?

A: Yes. The active product status, established supply chain, and comprehensive compliance certifications make the 1830498 the preferred choice for new applications requiring 10-position, 3.50mm pitch terminal block headers with 90° right-angle configuration.