OSTV702A151 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The OSTV702A151 is a 2-position terminal block header manufactured by On Shore Technology Inc., featuring female sockets with 0.295" (7.50mm) pitch and 90° right-angle orientation. This component is designed for solder mounting applications requiring reliable electrical connections in compact configurations.

The OSTV702A151 carries an Obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this connector type.

Substiute Parts

OSTV702A151

On Shore Technology Inc.In Stock: 798OSTV702A151 Datasheet

Current PartRFQ

V702A1510000G

Amphenol AnytekIn Stock: 1215V702A1510000G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the OSTV702A151 is determined by the following critical parameters:

• Connector Type & Configuration: Header with female sockets, 2-position arrangement
• Pitch Specification: 0.295" (7.50mm) center-to-center spacing
• Orientation: 90° right-angle configuration
• Electrical Rating: 300 V UL voltage rating minimum
• Mounting Interface: Solder or through-hole termination compatible with PCB assembly
• Mechanical Dimensions: Contact tail length 0.138" (3.50mm) and insulation height 0.138" (3.50mm)
• Compliance Standards: UL94 V-0 flammability rating, ROHS3 compliance, REACH unaffected status

The substitute part V702A1510000G from Amphenol Anytek meets these core substitution criteria while maintaining electrical and mechanical compatibility with the original OSTV702A151 specification.

Parameter Comparison

Engineering Selection Recommendations

The V702A1510000G substitute part is qualified for direct replacement of the OSTV702A151 based on the following engineering criteria:

Compliance & Certification Alignment: Both parts maintain UL94 V-0 flammability rating and ROHS3 compliance, ensuring regulatory continuity in applications subject to environmental and safety standards.

Electrical Specifications: The substitute part meets or exceeds the 300 V UL voltage requirement of the original component. The substitute additionally specifies 10 A current rating (UL), providing defined current-carrying capacity for circuit design verification.

Mechanical Compatibility: Identical pitch (0.295" / 7.50mm), contact tail length (0.138" / 3.50mm), and right-angle orientation ensure mechanical interchangeability on PCB layouts designed for the OSTV702A151.

Thermal Performance: The substitute part extends the operating temperature range to -40°C ~ 115°C, providing enhanced thermal margin compared to the original -30°C ~ 105°C specification.

Supply Status: The substitute part carries Active product status with documented inventory availability (1124 Pcs), addressing the obsolescence constraint of the original component.

Frequently Asked Questions (FAQ)

Q: Can V702A1510000G be used as a direct replacement for OSTV702A151 in existing designs?

A: Yes. Both parts share identical pitch (7.50mm), position count (2), orientation (90° right-angle), voltage rating (300 V), flammability rating (UL94 V-0), and contact tail dimensions (0.138"). The substitute part is mechanically and electrically compatible with PCB layouts designed for the OSTV702A151.

Q: What are the key differences between these parts?

A: The primary differences are: (1) Manufacturer (On Shore Technology vs. Amphenol Anytek), (2) Product status (Obsolete vs. Active), (3) Mounting type designation (Solder vs. Through Hole), (4) Current rating specification (not provided vs. 10 A UL), (5) Operating temperature range (-30°C~105°C vs. -40°C~115°C), and (6) Contact material specification (not provided vs. Phosphor Bronze). These differences do not affect substitution eligibility for the specified electrical and mechanical parameters.

Q: Are there packaging or inventory considerations for the substitute part?

A: The substitute part V702A1510000G is supplied in Bulk packaging with 1124 Pcs documented as new original in stock, providing immediate availability for production requirements.

Q: Does the substitute part maintain the same compliance certifications?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry UL94 V-0 flammability rating. Compliance status is maintained across the substitution.

Q: What is the basis for substitution eligibility?

A: Substitution is based on matching critical parameters: connector type (header, female sockets), position count (2), pitch (7.50mm), orientation (90° right-angle), voltage rating (300 V minimum), mounting compatibility (solder/through-hole), mechanical dimensions (contact tail and insulation height), and compliance certifications (UL94 V-0, ROHS3).