OSTOP060000 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The OSTOP060000 is a 6-position terminal block header manufactured by On Shore Technology Inc., designed for vertical solder mounting applications. This component features male pins in an unshrouded configuration with 0.197" (5.00mm) pitch spacing and is rated for 300V UL voltage. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component procurement flexibility and supply chain continuity.

Substiute Parts

OSTOP060000

On Shore Technology Inc.In Stock: 1207OSTOP060000 Datasheet

Current PartRFQ

EDSTL130/06

On Shore Technology Inc.In Stock: 1059EDSTL130/06 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the OSTOP060000 is determined by the following critical parameters:

• Number of Positions: 6 (exact match required)
• Pitch: 0.197" (5.00mm) (exact match required)
• Header Orientation: Vertical (exact match required)
• Type: Header, Male Pins, Unshrouded (exact match required)
• Voltage - UL: 300 V (minimum requirement)
• Product Status: Active (current production required)
• RoHS Status: ROHS3 Compliant (regulatory requirement)
• MSL Rating: 1 (Unlimited) (environmental requirement)

The EDSTL130/06 qualifies as a direct substitute based on matching electrical specifications (6 positions, 5.00mm pitch, vertical orientation, 300V rating, ROHS3 compliance, MSL 1). The primary distinction is the mounting method: OSTOP060000 uses solder mounting, while EDSTL130/06 uses through-hole mounting. Both termination styles are compatible with standard PCB assembly processes and provide equivalent electrical performance for the specified application parameters.

Parameter Comparison

Engineering Selection Recommendations

Both OSTOP060000 and EDSTL130/06 maintain active production status and satisfy ROHS3 compliance requirements. Selection between these parts is determined by PCB assembly methodology: OSTOP060000 is specified for surface-mount solder applications, while EDSTL130/06 is designated for through-hole PCB mounting. The electrical performance parameters—6-position configuration, 5.00mm pitch, 300V rating, and unlimited moisture sensitivity—are equivalent across both parts. Component selection should align with the PCB design specification and assembly process capability. Both parts carry identical regulatory certifications (ROHS3, REACH Unaffected, EAR99) and environmental ratings (MSL 1).

Frequently Asked Questions (FAQ)

Q: Can EDSTL130/06 replace OSTOP060000 in an existing design?

A: Substitution is possible only if the PCB design accommodates through-hole mounting instead of solder mounting. The electrical specifications and connector geometry are equivalent. PCB layout modification may be required.

Q: What is the primary difference between these two parts?

A: The mounting method differs: OSTOP060000 uses solder mounting for surface-mount assembly, while EDSTL130/06 uses through-hole mounting for traditional PCB insertion. All other specifications—position count, pitch, voltage rating, and compliance certifications—are identical.

Q: Are both parts suitable for 300V applications?

A: Yes. Both OSTOP060000 and EDSTL130/06 are rated for 300V UL voltage and are suitable for equivalent voltage applications.

Q: Do these parts have the same environmental rating?

A: Yes. Both parts carry MSL 1 (Unlimited) moisture sensitivity rating and are ROHS3 compliant, indicating equivalent environmental performance and regulatory compliance.

Q: What is the contact tail length for both parts?

A: Both parts have a contact tail length of 0.138" (3.50mm), ensuring compatible PCB hole spacing and mounting depth.