OSTES200150 Equivalent & Substitute Parts

Part Overview

The OSTES200150 is a 20-position wire-to-board terminal block manufactured by On Shore Technology Inc., designed for vertical PCB mounting with 5.00mm pitch spacing. This component features screw-based rising cage clamp termination and supports wire gauges from 14 to 30 AWG at 15A and 300V ratings.

The OSTES200150 carries an obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this terminal block configuration.

Substiute Parts

OSTES200150

On Shore Technology Inc.In Stock: 861OSTES200150 Datasheet

Current PartRFQ

ES2001500000G

Amphenol AnytekIn Stock: 1066ES2001500000G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the OSTES200150 is determined by strict equivalence across the following critical parameters:

• 20 positions per level configuration
• 0.197" (5.00mm) pitch spacing
• Vertical with board mating orientation
• Through hole mounting type
• Screw-based rising cage clamp termination
• M3 screw thread specification
• 15A current and 300V voltage ratings
• 14-30 AWG wire gauge compatibility

The substitute part ES2001500000G from Amphenol Anytek meets all these criteria, establishing direct functional and mechanical compatibility with the OSTES200150.

Parameter Comparison

Engineering Selection Recommendations

The ES2001500000G from Amphenol Anytek is a direct equivalent substitute for the obsolete OSTES200150. Both components are ROHS3 compliant, REACH unaffected, and classified under the same ECCN and HTSUS codes, confirming regulatory and compliance alignment.

The primary distinction is product status: the OSTES200150 is obsolete, while the ES2001500000G maintains active production status. This status difference, combined with documented inventory availability (1018 pcs for ES2001500000G versus 804 pcs for OSTES200150), supports ES2001500000G as the preferred selection for new designs and ongoing supply requirements.

All electrical, mechanical, and material specifications are identical between the two parts, ensuring drop-in compatibility at the PCB assembly level.

Frequently Asked Questions (FAQ)

Q: Can ES2001500000G replace OSTES200150 in existing designs?

A: Yes. ES2001500000G meets all functional and mechanical specifications of OSTES200150, including pitch, position count, current/voltage ratings, wire gauge compatibility, and screw termination parameters. No design modifications are required.

Q: Are there differences in operating temperature ranges?

A: The OSTES200150 operates from -30°C to 105°C, while ES2001500000G operates from -40°C to 115°C. ES2001500000G provides an extended operating range, making it suitable for applications requiring broader thermal performance.

Q: What is the significance of product status (obsolete vs. active)?

A: Obsolete status indicates the OSTES200150 is no longer manufactured. Active status for ES2001500000G confirms ongoing production and supply availability, reducing long-term sourcing risk.

Q: Are compliance certifications identical?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications.

Q: Does packaging differ between these parts?

A: OSTES200150 packaging is not specified in available data. ES2001500000G is supplied in bulk packaging. Confirm packaging requirements with your procurement team.

Q: Are the screw torque specifications the same?

A: Yes. Both components specify 0.49 Nm (4.3 Lb-In) torque for M3 screw termination, ensuring consistent assembly procedures.