OPV314F Equivalent & Substitute Parts

Part Overview

The OPV314F is a laser diode operating at 850nm wavelength with 0.5mW output power, designed for panel mount applications with FC connector termination. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system support and new design implementations. The OPV314F operates at 2.2V input voltage with 7mA current rating and maintains ROHS3 compliance with unlimited moisture sensitivity rating.

Substiute Parts

OPV314F

TT Electronics/Optek TechnologyIn Stock: 1176OPV314F Datasheet

Current PartRFQ

OPV314AT

TT Electronics/Optek TechnologyIn Stock: 1214OPV314AT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the OPV314F is determined by the following critical parameters:

• Wavelength: 850nm (exact match required)
• Input Voltage: 2.2V (exact match required)
• Current Rating: 7mA (exact match required)
• Panel Mount Configuration: Required
• RoHS3 Compliance: Required
• Moisture Sensitivity Level: 1 (Unlimited)

The OPV314AT qualifies as a substitute based on matching wavelength, voltage, and current specifications. The primary difference is the connector type (ST connector versus FC connector) and increased power output (1.4mW versus 0.5mW). Both components share the same base product number (OPV314) and are manufactured by TT Electronics/Optek Technology.

Parameter Comparison

Engineering Selection Recommendations

The OPV314AT is an active product offering from the same manufacturer, providing continuity for applications requiring 850nm laser diode functionality at 2.2V operation. Both components maintain identical electrical specifications (voltage and current) and share ROHS3 compliance with unlimited moisture sensitivity rating.

Selection of the OPV314AT requires mechanical compatibility verification due to connector type difference (ST versus FC). The increased power output (1.4mW versus 0.5mW) must be evaluated against system optical requirements and thermal management capabilities.

Frequently Asked Questions (FAQ)

Q: Can the OPV314AT directly replace the OPV314F?

A: Electrical compatibility is established through matching wavelength (850nm), input voltage (2.2V), and current rating (7mA). Mechanical compatibility requires connector type assessment, as the OPV314F uses FC connector termination while the OPV314AT uses ST connector termination.

Q: What is the significance of the power output difference between these parts?

A: The OPV314F delivers 0.5mW output while the OPV314AT delivers 1.4mW. Both operate at identical electrical input parameters. System optical design must accommodate the higher power output of the substitute part.

Q: Are both parts compliant with current regulatory standards?

A: Both the OPV314F and OPV314AT maintain ROHS3 compliance and are unaffected by REACH regulations. Both carry ECCN classification EAR99 and HTSUS code 8541.41.0000.

Q: What is the moisture sensitivity implication for these components?

A: Both parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly processes.

Q: Why is the OPV314F classified as obsolete?

A: Obsolete status indicates the part is no longer in active production. The OPV314AT, as an active product from the same manufacturer with compatible electrical specifications, serves as the current production alternative.