OPV314BT Equivalent & Substitute Parts

Part Overview

The OPV314BT is a laser diode operating at 850nm wavelength with panel mount configuration and ST connector interface. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system support and component procurement.

The OPV314BT specifications include 2.2V input voltage, 7mA current rating, and panel mount packaging with ST connector. Due to its obsolete status, equivalent active components must be evaluated to maintain design continuity and supply chain reliability.

Substiute Parts

OPV314BT

TT Electronics/Optek TechnologyIn Stock: 767OPV314BT Datasheet

Current PartRFQ

OPV314AT

TT Electronics/Optek TechnologyIn Stock: 1214OPV314AT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the OPV314BT is determined by the following critical parameters:

• Wavelength: 850nm (exact match required)
• Voltage - Input: 2.2V (exact match required)
• Current Rating: 7mA (exact match required)
• Package / Case: Panel Mount, ST Connector (exact match required)
• RoHS Status: ROHS3 Compliant (compliance requirement)
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The OPV314AT meets all substitution criteria as an active equivalent component.

Parameter Comparison

Engineering Selection Recommendations

The OPV314AT is the manufacturer-recommended substitute for the obsolete OPV314BT. Both components share identical electrical specifications (850nm wavelength, 2.2V input, 7mA current) and mechanical packaging (panel mount, ST connector).

The OPV314AT maintains active product status with current manufacturing support, ensuring long-term availability and supply chain continuity. Both parts comply with ROHS3 and REACH requirements, with identical moisture sensitivity ratings.

The OPV314AT provides specified power output of 1.4mW, whereas the OPV314BT power specification was not provided in the original documentation.

Frequently Asked Questions (FAQ)

Q: Can the OPV314AT directly replace the OPV314BT in existing designs?

A: Yes. The OPV314AT matches all critical electrical and mechanical parameters: 850nm wavelength, 2.2V input voltage, 7mA current rating, and panel mount ST connector configuration. Both components are ROHS3 compliant with identical moisture sensitivity levels.

Q: Why is the OPV314BT listed as obsolete?

A: The OPV314BT has reached end-of-life status. The OPV314AT is the active equivalent component from the same manufacturer and series.

Q: Are there any compliance differences between these parts?

A: No. Both the OPV314BT and OPV314AT are ROHS3 compliant, REACH unaffected, and share identical moisture sensitivity ratings (MSL 1 - Unlimited).

Q: What is the difference in power output between these components?

A: The OPV314AT specifies 1.4mW power output. The OPV314BT power specification was not documented in the original part data.

Q: Are the connector types identical?

A: Yes. Both components use ST connector interface with panel mount configuration.