OPV282 Equivalent & Substitute Parts

Part Overview

The OPV282 is a laser diode operating at 850nm wavelength with 4.5mW output power and 30mA current rating in a radial, side view package. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system support and new design implementations. The radial side view package configuration and 850nm wavelength specification are critical parameters for determining functional equivalence.

Substiute Parts

OPV282

TT Electronics / Optek TechnologyIn Stock: 1020OPV282 Datasheet

Current PartRFQ

OPV382

TT Electronics/Optek TechnologyIn Stock: 1453OPV382 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the OPV282 are identified based on the following critical parameters:

• Wavelength Match: 850nm (primary functional requirement)
• Package Configuration: Radial, Side View (mechanical and electrical interface requirement)
• Manufacturer Compatibility: TT Electronics / Optek Technology product line

The OPV382 is listed as a manufacturer-recommended substitute. While the OPV382 operates at the same 850nm wavelength and uses the identical radial side view package, it differs in power output (1.5mW versus 4.5mW) and current rating (7mA versus 30mA). These differences indicate the OPV382 is a lower-power variant within the same product family and package platform.

Parameter Comparison

Engineering Selection Recommendations

The OPV382 is the manufacturer-recommended substitute for the obsolete OPV282. Both components share identical wavelength (850nm) and package configuration (radial, side view), establishing mechanical and optical compatibility.

The OPV382 is classified as active product status, ensuring ongoing availability and supply chain continuity. The OPV382 carries RoHS3 compliance certification, whereas the OPV282 compliance status is not specified in available documentation.

Selection of the OPV382 requires evaluation of system power requirements. The OPV382 delivers 1.5mW output at 7mA, compared to the OPV282 specification of 4.5mW at 30mA. Applications requiring the full 4.5mW output power of the original OPV282 may require circuit redesign or alternative component sourcing.

Frequently Asked Questions (FAQ)

Q: Can the OPV382 directly replace the OPV282 in existing designs?

A: Both components use the radial side view package and operate at 850nm wavelength, providing mechanical and optical interface compatibility. However, the OPV382 delivers lower power output (1.5mW versus 4.5mW) and operates at lower current (7mA versus 30mA). Direct replacement is possible only if system design tolerates reduced optical power.

Q: What is the significance of the radial, side view package specification?

A: The radial side view package defines the physical form factor and electrical connection method. This specification ensures mechanical fit within existing component sockets and proper optical beam orientation. Substitute parts must maintain this package configuration for compatibility.

Q: Why is the OPV282 classified as obsolete?

A: Obsolete classification indicates the manufacturer has discontinued production. The OPV382 represents the active product line continuation within the same wavelength and package family.

Q: Are there compliance differences between OPV282 and OPV382?

A: The OPV382 is certified RoHS3 compliant. The OPV282 compliance status is not documented in available specifications. Both components are REACH unaffected and carry EAR99 ECCN classification.

Q: What moisture sensitivity level applies to these components?

A: Both OPV282 and OPV382 carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.